F/S 87 Gmc sierra classic 4x4 in need of work
06-25-2008, 08:14 PM
#1
12 Second Club
Thread Starter
iTrader: (4)
Join Date: Mar 2005
Location: woodbury,ct
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
F/S 87 Gmc sierra classic 4x4 in need of work I have an 87 sierra classic short bed 4x4, loaded for its time, ac power windows locks rear slider,dual tanks, originally 305 4 speed now 350 th-400
the motor has a new oil pump, all new gaskets and valve seals, summit cam pushrods lifters . the tranny came out of a wrecked truck with 50k it was serviced and a new protorque 2400 stall converter was installed I put on about 2k after the swap. the tires are lightly used 31x10.5 futura m/t...it sounds good but here is the bad, the body is rotted in the typical places fenders doors rockers cab corners also the frame had a rot spot on the drivers side behind the spring perch and had a plate bolted in, so basically it needs a new frame rail and body panels, I do have new fenders rockers and cab corners that I never installed that I will include (paid $300) and i might still have the 4 speed manual trans $400 take it away
the motor has a new oil pump, all new gaskets and valve seals, summit cam pushrods lifters . the tranny came out of a wrecked truck with 50k it was serviced and a new protorque 2400 stall converter was installed I put on about 2k after the swap. the tires are lightly used 31x10.5 futura m/t...it sounds good but here is the bad, the body is rotted in the typical places fenders doors rockers cab corners also the frame had a rot spot on the drivers side behind the spring perch and had a plate bolted in, so basically it needs a new frame rail and body panels, I do have new fenders rockers and cab corners that I never installed that I will include (paid $300) and i might still have the 4 speed manual trans $400 take it away
