WTB: Heavily Modded LS1 F-Body CASH-IN HAND!!!
#24
TECH Fanatic
iTrader: (1)
Join Date: May 2003
Location: St Clairsville, Oh
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
99 Trans Am M6 Black. $12,750 OBO
77000miles on the car and 3000 on the motor, tranny and rear end.
Motor. 9:1 CR 410rwhp N/A. Ready for the spray or FI
6.0 30 over diamond -15cc pistons .024top ring .030 bottom ring.
Forged rods and arp rod bolts stretched to .005
SDPC ls6 heads 918 spings and arp studs head studs and main studs. Thunder Racing ported oil pump.
228/228 .588/.588 114lsa cam.
LS6 manifold, S2 and lid.
Tube K member
Hooker headsers with a QTP Y pipe with dual cutouts with a borla cat back.
Fully rebuild M6 tranny with all the goodies. Mccleod Twin-Disk BMR ajustible torque arm and pro 5.0 shifter
BMR SFC install before i did any drag racing.
Denis Nitrous ready D/S 1350
8.8 rearend with 3.73 gears and 1/2 studs.
Eclipes 5442 head unit
3.1 EQ
Diamond 6.1 door speekers
750X Rockford am
10 pocked sub.
Any questions please call 817 8916734 Justin. Must sell
http://www.autotrader.com/fyc/vdp.j...5000&cardist=18
77000miles on the car and 3000 on the motor, tranny and rear end.
Motor. 9:1 CR 410rwhp N/A. Ready for the spray or FI
6.0 30 over diamond -15cc pistons .024top ring .030 bottom ring.
Forged rods and arp rod bolts stretched to .005
SDPC ls6 heads 918 spings and arp studs head studs and main studs. Thunder Racing ported oil pump.
228/228 .588/.588 114lsa cam.
LS6 manifold, S2 and lid.
Tube K member
Hooker headsers with a QTP Y pipe with dual cutouts with a borla cat back.
Fully rebuild M6 tranny with all the goodies. Mccleod Twin-Disk BMR ajustible torque arm and pro 5.0 shifter
BMR SFC install before i did any drag racing.
Denis Nitrous ready D/S 1350
8.8 rearend with 3.73 gears and 1/2 studs.
Eclipes 5442 head unit
3.1 EQ
Diamond 6.1 door speekers
750X Rockford am
10 pocked sub.
Any questions please call 817 8916734 Justin. Must sell
http://www.autotrader.com/fyc/vdp.j...5000&cardist=18
#25
FormerVendor
iTrader: (8)
Join Date: Dec 2001
Location: Melbourne, FL
Posts: 2,179
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
A little higher than $15k but worth a look.
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/540127-2000-z28-fs.html
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/540127-2000-z28-fs.html
#27
TECH Fanatic
iTrader: (2)
Join Date: Nov 2001
Location: Baton Rouge
Posts: 1,894
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here ya go. Motor was built for heavy juice. I'll have some good pics in a few days if you are interested. $20K. I know it's more then you wanted to spend but I'm motivated to sell.
Engine
Katech Resleeved LS1 Block (4.060 Bore) (can go to 4.100)
Katech Billet Main Caps
ARP Main Studs
ARP Head Studs
New Stock Crank
Oliver Billet CM Rods
Diamond Custom Nitrous Pistons
Diamond Piston Rings
GTP Stage III LS6 Custom Ported Heads (flowed over 337cfms)
Custom Ferrea SS 2.100 / 1.60 Valves
T&D Shaft Mount Rocker Arms
Comp Cams Valve Springs
Manley Ultra Light Titanium Retainers
Manley Titanium Valve Locks
Comp Cams CM 1 piece Pushrods
Thunder Racing Custom Solid Roller Camshaft
Cloys Hex-Adjust Timing Set
C5R Timing Chain Dampener
Ported and Blueprinted LS6 Oil Pump
LS6 Intake
TR Ported TB
Katech Cast Al. Valve Covers
Katech Coil Relocation Kit w/ Plug Wires
Motor Completely Balanced and Blueprinted
Drivetrain
Spec Stage IV-F Clutch
Spec Al. Flywheel
McLeod Adj. Clutch Master Cylinder
Stock GM T-56 Transmission
Hurst Chrome Stick Shifter
Moser 9 Rearend
- Detroit Locker
- 35 Spline Gundrilled Axles
- Al. Center Section
- 4 ch. ABS brakes w/ Traction Control
- 4.30 gears
- Narrowed 2.5
Centerline Convo Pro Wheels
- 15 x 3.5 Front w/ 195/R15 tires
- 15 x 8.5 Rear w/ MT 275/50/15 ET Street Radials
Suspension
Front
- BMR Tubular K-member
- BMR Upper & Lower Tubular A-arms
- BMR Strut Tower Brace
Rear
- BMR 1 Lowering Springs
- BMR Adj. Xtreme Duty Control Arms
- BMR Adj. Panhard Rod
- BMR Adj. Tubular Torque Arm
- QA1 12-Way Adj. Shocks
Exhaust
TR 1 7/8 Long Tube Headers Ceramic Coated
Mufflex 3 Y-pipe w/ 4 Collector
Magnaflow Catback Exhaust System
Brakes
Powerslot Slotted Rotors (Front & Rear)
Hawk HPS Brake Pads (Front & Rear)
General
Factory Hugger Orange Paint
Tan Leather Interior
T-Tops
SLP Ultra-Z Ram Air Hood
- Custom Painted Hugger Orange w/ Ram Air & Black Stripes
SLP Bow Tie Grill
Rear Light Panel Custom Painted Black
Factory A/C & Power Steering
46,000 miles
6-point Bolt-in CM Roll Bar w/ Dual Swing-out (not installed)
Engine
Katech Resleeved LS1 Block (4.060 Bore) (can go to 4.100)
Katech Billet Main Caps
ARP Main Studs
ARP Head Studs
New Stock Crank
Oliver Billet CM Rods
Diamond Custom Nitrous Pistons
Diamond Piston Rings
GTP Stage III LS6 Custom Ported Heads (flowed over 337cfms)
Custom Ferrea SS 2.100 / 1.60 Valves
T&D Shaft Mount Rocker Arms
Comp Cams Valve Springs
Manley Ultra Light Titanium Retainers
Manley Titanium Valve Locks
Comp Cams CM 1 piece Pushrods
Thunder Racing Custom Solid Roller Camshaft
Cloys Hex-Adjust Timing Set
C5R Timing Chain Dampener
Ported and Blueprinted LS6 Oil Pump
LS6 Intake
TR Ported TB
Katech Cast Al. Valve Covers
Katech Coil Relocation Kit w/ Plug Wires
Motor Completely Balanced and Blueprinted
Drivetrain
Spec Stage IV-F Clutch
Spec Al. Flywheel
McLeod Adj. Clutch Master Cylinder
Stock GM T-56 Transmission
Hurst Chrome Stick Shifter
Moser 9 Rearend
- Detroit Locker
- 35 Spline Gundrilled Axles
- Al. Center Section
- 4 ch. ABS brakes w/ Traction Control
- 4.30 gears
- Narrowed 2.5
Centerline Convo Pro Wheels
- 15 x 3.5 Front w/ 195/R15 tires
- 15 x 8.5 Rear w/ MT 275/50/15 ET Street Radials
Suspension
Front
- BMR Tubular K-member
- BMR Upper & Lower Tubular A-arms
- BMR Strut Tower Brace
Rear
- BMR 1 Lowering Springs
- BMR Adj. Xtreme Duty Control Arms
- BMR Adj. Panhard Rod
- BMR Adj. Tubular Torque Arm
- QA1 12-Way Adj. Shocks
Exhaust
TR 1 7/8 Long Tube Headers Ceramic Coated
Mufflex 3 Y-pipe w/ 4 Collector
Magnaflow Catback Exhaust System
Brakes
Powerslot Slotted Rotors (Front & Rear)
Hawk HPS Brake Pads (Front & Rear)
General
Factory Hugger Orange Paint
Tan Leather Interior
T-Tops
SLP Ultra-Z Ram Air Hood
- Custom Painted Hugger Orange w/ Ram Air & Black Stripes
SLP Bow Tie Grill
Rear Light Panel Custom Painted Black
Factory A/C & Power Steering
46,000 miles
6-point Bolt-in CM Roll Bar w/ Dual Swing-out (not installed)
#28
#29
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If you are still interested:
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/575651-2001-nbm-camaro-z28-gauging-interest.html
PM me for pics.
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/575651-2001-nbm-camaro-z28-gauging-interest.html
PM me for pics.
#30
Launching!
iTrader: (8)
Join Date: Apr 2005
Location: MINELLI!!
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey I know you were interested in my car last month, I still have it for sale.
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/579168-fs-z28-race-car-14-000-obo-all-reasonable-offers-considered.html
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/579168-fs-z28-race-car-14-000-obo-all-reasonable-offers-considered.html