WTT 00'-02' SS/Z28 for 03 DSG cobra
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Nov 2002
Location: phoenix,az
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bought it from a dealer in Texas two years ago with 11k on it, it now has just over 18k. Performance Solutions Racing has done all the work except clutch and the rear end. The only time it was to the track was when it was stock and it went 13.1 at 107 on stock f1s.
Modifications:
- LFP intercooler
- 8# lower
- 3.0 upper(have others also)
- 60# injectors
- stieg stage 4 port
- KB BAP, K&N
- Pro5.0 shifter
- Sct 4 way chip
- Autometer gauges
- DFX clutch w 26 spline shaft
- Fiore adjuster
- bassani exhaust( x-pipe back)
- nitrous
- TR6’s gapped at 32
- solid axle conversion
- carbon fiber clutches
- 31 spline axles
- 3.90 gears(Previously installed and are tight so they whine a bit)
- UPR uppers and lowers are dbl adj w/spherical bushings
- predator tuner
- extended studs on all four corners
- innovate LC-1 with xd16 kit wideband
- 315 drag radials
The nitrous has only been used on the dyno to tune and there’s only been one bottle through it(tuning still needs finished.) The car has about 2000 miles on it since being modded. The only things wrong with it are, spoiler brake light is cracked(came that way), One or two rims have curb rubs on the rim(came that way and its not bad at all) and a small extrusion in the rear bumper from the install of the bap. There is nothing mechanically wrong with this car. The tuning still needs to be finished, Dyno was mid 400/400 on motor and mid 500/590s(Four pulls total) with a very conservative tune.
I'm sure I have left other stuff out I am going to throw in any parts stock or after market that I have for the car also. If you want something taken off I might be able to do that as well and lower the price some. I might be able to get the bumper fixed if that’s a big concern.
looking to get $25,000 or partial trade/cash for clean SS or ??? with mods
![](http://i7.photobucket.com/albums/y267/sandbaggersteve/03dsg.jpg)
![](http://i7.photobucket.com/albums/y267/sandbaggersteve/03dsg2.jpg)
Modifications:
- LFP intercooler
- 8# lower
- 3.0 upper(have others also)
- 60# injectors
- stieg stage 4 port
- KB BAP, K&N
- Pro5.0 shifter
- Sct 4 way chip
- Autometer gauges
- DFX clutch w 26 spline shaft
- Fiore adjuster
- bassani exhaust( x-pipe back)
- nitrous
- TR6’s gapped at 32
- solid axle conversion
- carbon fiber clutches
- 31 spline axles
- 3.90 gears(Previously installed and are tight so they whine a bit)
- UPR uppers and lowers are dbl adj w/spherical bushings
- predator tuner
- extended studs on all four corners
- innovate LC-1 with xd16 kit wideband
- 315 drag radials
The nitrous has only been used on the dyno to tune and there’s only been one bottle through it(tuning still needs finished.) The car has about 2000 miles on it since being modded. The only things wrong with it are, spoiler brake light is cracked(came that way), One or two rims have curb rubs on the rim(came that way and its not bad at all) and a small extrusion in the rear bumper from the install of the bap. There is nothing mechanically wrong with this car. The tuning still needs to be finished, Dyno was mid 400/400 on motor and mid 500/590s(Four pulls total) with a very conservative tune.
I'm sure I have left other stuff out I am going to throw in any parts stock or after market that I have for the car also. If you want something taken off I might be able to do that as well and lower the price some. I might be able to get the bumper fixed if that’s a big concern.
looking to get $25,000 or partial trade/cash for clean SS or ??? with mods
![](http://i7.photobucket.com/albums/y267/sandbaggersteve/03dsg.jpg)
![](http://i7.photobucket.com/albums/y267/sandbaggersteve/03dsg2.jpg)
![](http://i7.photobucket.com/albums/y267/sandbaggersteve/03dsg3.jpg)
Last edited by fastls1inaz; 01-16-2009 at 11:16 PM.
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
https://ls1tech.com/forums/showthrea...ss+2001+camaro
im trying to sell my car to get a cobra. so leme know what u think
im trying to sell my car to get a cobra. so leme know what u think
Trending Topics
#15
10 Second Club
iTrader: (19)
Join Date: Aug 2008
Location: Kentucky
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
my car and how much boot are we talking and would you be coming to pick up the car ?
https://ls1tech.com/forums/vehicles-...-wheels-2.html
https://ls1tech.com/forums/vehicles-...-wheels-2.html
#17
Teching In
Join Date: Sep 2007
Location: Ottawa, Canada
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
2002 Camaro Z28 Vert - 35th Anniversary Edition
Blk int, blk ext, blk wheels
Pacesetter LT headers
Pacesetter ORY
Magnaflow Catback
SLP Lid
K&N
Dyno tune
70,000km - 43,500 miles
![](http://i389.photobucket.com/albums/oo333/black35se/n503002996_693825_3627.jpg)
![](http://i389.photobucket.com/albums/oo333/black35se/n503002996_693823_2618.jpg)
Blk int, blk ext, blk wheels
Pacesetter LT headers
Pacesetter ORY
Magnaflow Catback
SLP Lid
K&N
Dyno tune
70,000km - 43,500 miles
![](http://i389.photobucket.com/albums/oo333/black35se/n503002996_693825_3627.jpg)
![](http://i389.photobucket.com/albums/oo333/black35se/n503002996_693823_2618.jpg)
![](http://i389.photobucket.com/albums/oo333/black35se/n503002996_693813_3731.jpg)
#20
Teching In
Join Date: Jan 2009
Location: Reidsville, NC
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ive got my supersport on vehicle classifieds, LSX powered ONLY for sale... check it out you might like it.
its under ----2002 Supersport H/C Camaro---- Super Clean!!!
its under ----2002 Supersport H/C Camaro---- Super Clean!!!