***WTB: ROLLER - 98+ Firehawk, SS, WS6, Z28
#1
Thread Starter
TECH Resident
iTrader: (46)
Joined: Dec 2001
Posts: 821
Likes: 0
From: Some where in the Corn Fields of Illinois
***WTB: ROLLER - 98+ Firehawk, SS, WS6, Z28
I'm in North Central Illinois, about 1.5 hours southwest of Chicago and am looking for a roller...
Here's my list of REQUIREMENTS
-Body/chassis must be clean and well taken care of
-98-02
-Firehawk, SS, WS6, Trans Am, or Z28
-No preference on color
-No Preference on transmission
-Prefer all harnesses, electronics, etc
-NO convertibles
-Prefer leather, power everything, but if you have something else let me know.
Basically im looking for a very clean car that just needs a drivetrain. I
IF you've got something, let me know. I've got CASH in hand ready to buy. IF you need my number, send me a PM and we can talk over the phone.
Here's my list of REQUIREMENTS
-Body/chassis must be clean and well taken care of
-98-02
-Firehawk, SS, WS6, Trans Am, or Z28
-No preference on color
-No Preference on transmission
-Prefer all harnesses, electronics, etc
-NO convertibles
-Prefer leather, power everything, but if you have something else let me know.
Basically im looking for a very clean car that just needs a drivetrain. I
IF you've got something, let me know. I've got CASH in hand ready to buy. IF you need my number, send me a PM and we can talk over the phone.
Last edited by SMKN TA 95; 09-02-2008 at 11:58 PM.
#2
Roller
I have an 02 SS M6 car that I bought with blown motor. It was hydrolocked and the insurance company paid it off. Only has 50K miles, but has rebuilt title. NEVER any water inside the car or collision damage. The nose has a few nics & scratches, but nothing unsightly. Currently running now, but I'm taking the drivetrain out for a 69 camaro project. I was looking to take the computer & engine harness as well, but would leave it in if I got a few extra $ to buy another CPU & harness. It's navy blue with tan leather. Everything is hooked up & works, cold AC. The pass window is slow and most of the speakers are missing. Stock head unit is there but is locked. Stock silver SS wheels with good tires. I am located in North FL, not sure if thats too far for you, but sounds like I had what you were looking for. I should have the motor out next month, but could have it out sooner if needed.
Scott
850 380-9500
Scott
850 380-9500
#3
#6
Thread Starter
TECH Resident
iTrader: (46)
Joined: Dec 2001
Posts: 821
Likes: 0
From: Some where in the Corn Fields of Illinois
Excuse me? Serious, yes. There have been numerous rollers for sale over the past couple of months, and why not put up a WTB add instead.
I just picked up a very very nice roller this weekend......
If you don't have a roller for sale, stay out of this thread.
I just picked up a very very nice roller this weekend......
If you don't have a roller for sale, stay out of this thread.
#7
Trending Topics
#8
Thread Starter
TECH Resident
iTrader: (46)
Joined: Dec 2001
Posts: 821
Likes: 0
From: Some where in the Corn Fields of Illinois
Similar, but not the same.
Again, if you have a roller for sale please post or email me.....if you don't have a roller for sale please stay out of my thread.
#10
i have a 98 ram air ta. bright atlantic blue(cobra color). body and interior are in great shape! has tubular k-member, a-arms, adjustable torque arm, lower control arms. no cage, but thats something that could be worked out! iv had plans on welding in a cage for some time, but never got around to it. has stock 10 bolt, and drag lites. air and heater are removed from under dash and engine compartment. computer is still in car with complete wiring harness. can send pics asap. located in southern OH. need 6k, but can make arrangements based on what you want. thanks!!