Irwindale tomorrow (6/4/09)
06-03-2009, 02:50 PM
#31
Launching!
iTrader: (6)
Join Date: Aug 2007
Location: La Puente
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
Ease it out from about 3500 then when your all the way out floor it. With stick you need to easy it out at high RPM so it wont brake the tires loose.
Last time I ran at Fontana on MT DR's Eased it out at about 3500rpms. I need to try about 4000rpms next time to get a sub 2.0'
I've never pulled anything lower than a 2.08 in fear of the rear going "BOOM"
06-03-2009, 03:03 PM
#33
Dont dump at all!!
Ease it out from about 3500 then when your all the way out floor it. With stick you need to easy it out at high RPM so it wont brake the tires loose.
Last time I ran at Fontana on MT DR's Eased it out at about 3500rpms. I need to try about 4000rpms next time to get a sub 2.0'
I've never pulled anything lower than a 2.08 in fear of the rear going "BOOM"
Ease it out from about 3500 then when your all the way out floor it. With stick you need to easy it out at high RPM so it wont brake the tires loose.
Last time I ran at Fontana on MT DR's Eased it out at about 3500rpms. I need to try about 4000rpms next time to get a sub 2.0'
I've never pulled anything lower than a 2.08 in fear of the rear going "BOOM"
06-03-2009, 03:10 PM
#34
Dont dump at all!!
Ease it out from about 3500 then when your all the way out floor it. With stick you need to easy it out at high RPM so it wont brake the tires loose.
Last time I ran at Fontana on MT DR's Eased it out at about 3500rpms. I need to try about 4000rpms next time to get a sub 2.0'
I've never pulled anything lower than a 2.08 in fear of the rear going "BOOM"
Ease it out from about 3500 then when your all the way out floor it. With stick you need to easy it out at high RPM so it wont brake the tires loose.
Last time I ran at Fontana on MT DR's Eased it out at about 3500rpms. I need to try about 4000rpms next time to get a sub 2.0'
I've never pulled anything lower than a 2.08 in fear of the rear going "BOOM"
06-03-2009, 03:11 PM
#35
Launching!
iTrader: (6)
Join Date: Aug 2007
Location: La Puente
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
1.8-2.0 with a good launch. Every tenth off your 60' is a tenth of your ET. So its worth it.
Example: I ran 13.33 with a 2.16 60'
If I get my 60' down to 1.8 or so Im KNocking on 12's with no bolt ons!
He he he he he he he Just need more driver mods!!!! aka more behind the wheel launching on my DR's
Example: I ran 13.33 with a 2.16 60'
If I get my 60' down to 1.8 or so Im KNocking on 12's with no bolt ons!
He he he he he he he Just need more driver mods!!!! aka more behind the wheel launching on my DR's
