carbonfiberbird

iTrader: (4)

Its a 3' stainless mandrel bent Spintech cat backI'm gonna try and install it tomorrow and then I'll try and figure out how to make a sound clip. I dont have a video camera but I'll see what else I could do.

ssteven

iTrader: (6)

Shiney......Ya need to adjust your camera date.

MrElectric03

iTrader: (71)

Nice, shame it sits under the car and cant be seen.

carbonfiberbird

iTrader: (4)

Yeah I'm not good at all with computers and things of that nature so it will always say that date
yeah you'll be able to see it if you look, but I always like to have stainless exhaust systems just form the quality aspect, dont care too much about the looks. The real shame is that my car will sound meaner than my 01 but has 1/2 the hp

Mr.z/28

iTrader: (8)

Nice!
Maybe one of your buddies can help you out on the camera thing.
I would love to hear that once is on.

droptopT/A

iTrader: (19)

nice how would one of these exhaust sound on a 99 ls1 me like

carbonfiberbird

iTrader: (4)

Yeah I'm gonna ask a buddy of mine thats all into that kind of thing
heres link to the exhaust
http://www.spintechmufflers.com/exha.../prod_804.html

the quality is GOOD!

95'FiReChIcKeN

iTrader: (1)

NICE! can't wait to hear that thing.

SS DNA

iTrader: (7)

Never heard that exhaust before.... Are you going to post videos ?

m6ttop

iTrader: (18)

Looksa very nice!!!

carbonfiberbird

iTrader: (4)

thanks man, yeah I'm gonna try and get a clip up when its installed.
Actually I've never heard a full cat back on a f-body either but I heard a straight muffler and it sounded good, but I've heard alot of mustang 5.0s with them and they sound bad *** on the stangs! Actually my bro(a mustang guy) told me about them so thats how I learned about them, there located off the 60 exit pedely. Pretty cool guy too, I picked it up right after they finished it.
thanks man!

brian_rs/ss

bump for exhaust clip!

carbonfiberbird

iTrader: (4)

yeah the exhaust didn't fit so I have to drop my car off and he's gonna fix it for me, also I may get a dirt cheap prototype Y pipe made for real cheap, but I'll just have to see what he says when I drop my car off.

carbonfiberbird

iTrader: (4)

Sounds badass! I'll try and get some clips up but they'll be off my phone

Soul TKR

iTrader: (4)

I dunno what it is about square exhaust mufflers, but they just never have appealed to me...

nomoneyz

iTrader: (15)

I heard about those ages ago. They make a 4inch catback for fbodies also. I love the sound but a bit pricey for me.

carbonfiberbird

iTrader: (4)

Honestly I never even thought about it, if its shiny and stainless its looks good to me
Isnt 4" a bit over kill even for ls1 cars? Yeah when all was said and done it turned out to be 800 bucks buts it cool. Right now I'm just saving and doing whole lot of research on what my next set up will be. I'm still debating between 355,383,and lsx/lm7. I'm kinda leaning toward 383 for a whole host of reason.

dreemurY2K SS

iTrader: (1)

u should put the gta body kit on yours would look sick.

ima run with a custom with a 2.5 with dynomax mufflers..

dreemurY2K SS

iTrader: (1)

an i say go with a 355 full bolt ons an spray a lot cheaper than the 383 an have almost same power.. with spray

carbonfiberbird

iTrader: (4)

Dynomax sound really good, If I were u I'd run a 3" set up I was told is a good size. I like having a formula, a gta kit would look good but I'm all done with paint for now.

Well I'm shooting for aroud 400 whp, I dont think I could do that with a 355 but I'm still searching on the different routes, but I've pretty much ruled out an lsx even a 355 is unlikely for me to do. I think I'm just gonna stick with this car and not get a 4th gen too. I'm gonna do everything my self and I already have a vortech 350 I plan on using.

I cant wait to see your car too man its gonna be nice