CMS is the Shiznit!
CMS is the Shiznit! Ryne took 3-4 hours tweaking on my car because I did a few new mods. He was able to get my idle and crusing tune dialed in great. He stayed at the shop till 830 pm making sure he had my car just right and changed my tune to Speed Density. We did some runs and I was able to pick up some nice gains. I'm very happy with his tuning and I am super stoked my car runs as good as it does.
I replaced my MS3 cam with a 247/251. I also added bigger headers and ported my FAST 92.
The picture below shows a comparison to the last time I was there and got my car dynoed.
I'll be getting some 4.10's installed by CMS very soon and then its off to the track to she what she will do.
I replaced my MS3 cam with a 247/251. I also added bigger headers and ported my FAST 92.
The picture below shows a comparison to the last time I was there and got my car dynoed.
I'll be getting some 4.10's installed by CMS very soon and then its off to the track to she what she will do.
I'm also trying to get some skinnies for the front so it might be a little bit before I get out to the track. On a side note I just realised I made 50 RWHP & 35 RWTQ more at 6400
Last edited by Fifedogg; Mar 13, 2011 at 02:56 PM.
Been very happy with my lowly LTX build (11.24 @ 119 mph) and very happy with the cam/intake swap on my Z06. 550rwhp ain't that shabby. Soon to have an LS1 PCM controlling my 496 bbc.
I want to put the gears in first as I want to make it count because I get kicked out 1st run I'm also trying to get some skinnies for the front so it might be a little bit before I get out to the track.
On a side note I just realised I made 50 RWHP & 35 RWTQ more at 6400
I'm also trying to get some skinnies for the front so it might be a little bit before I get out to the track. On a side note I just realised I made 50 RWHP & 35 RWTQ more at 6400
Trending Topics
James, Wow!!!!!congratz on ur new setup man, i won't stand a chance at least give me the go......lol........
dang it's time to upgrade, laying away an LS7 turbo in the morning....
dang it's time to upgrade, laying away an LS7 turbo in the morning
.... LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
LS1TECH Sponsor
Joined: Nov 2007
Posts: 16
Likes: 0
I can't wait to get my motor finished.
Gotcha! I went off of your newest dyno sheet, my bad.
I've got a 402 with AFR 72cc 230v2's (milled to 67), a ported 102/102/104 combo, and a cam that is still being spec'd (but similar to yours). I'm shooting to have this baby in in a month and a half or so...... or as soon as I start working again, lol.
If you're free tonight, swing out to Bob's in Burbank tonight so I can hear that thing!
I've got a 402 with AFR 72cc 230v2's (milled to 67), a ported 102/102/104 combo, and a cam that is still being spec'd (but similar to yours). I'm shooting to have this baby in in a month and a half or so...... or as soon as I start working again, lol.
If you're free tonight, swing out to Bob's in Burbank tonight so I can hear that thing!
