How many people from Fresno area?
03-09-2009, 09:56 AM
#1023
TECH Fanatic
iTrader: (9)
Join Date: Nov 2006
Location: Fresno, California
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
The nostalgia drags rocked! I swear to god I could have lived there. its funny though I always used to think 11's were fast, until now....I need more money!
03-10-2009, 07:42 PM
#1024
UPDATE: 3-10-08
Called FP today. At first, my bearings were possibly going to arrive this past friday. Then it sounded like Tuesday would be the day. Now Greg said they should be here Thursday this week. As long as they get here this week its the same to me!
Called FP today. At first, my bearings were possibly going to arrive this past friday. Then it sounded like Tuesday would be the day. Now Greg said they should be here Thursday this week. As long as they get here this week its the same to me!
03-11-2009, 02:02 AM
#1026
Ya sean to save on freght we have them send them on there delivery truck that runs once aweek.I will be busy all day saturday so i cant touch the motor then,but hopefully sunday.
Also motor will be in the cobra on thursday.
Also motor will be in the cobra on thursday.
03-13-2009, 03:15 AM
#1029
Update,my junk is together YAY finally!
Big Thanks To Bill,from the machine shop(FResno Performance) for the kickass machine work,Greg for rounding up all the parts(Fresno Performance)Steve Spurrier for suspension(Fresno Performance),exhaust,fab work!!!My boss Chris for letting me build it at the shop,Scott from Automotion for the removal and alot of help on the install,Whipple for the blower,Doherity cams,Tim Kerber at Air Flow Performance for the kick *** heads.
Let me know what you guys think!
Big Thanks To Bill,from the machine shop(FResno Performance) for the kickass machine work,Greg for rounding up all the parts(Fresno Performance)Steve Spurrier for suspension(Fresno Performance),exhaust,fab work!!!My boss Chris for letting me build it at the shop,Scott from Automotion for the removal and alot of help on the install,Whipple for the blower,Doherity cams,Tim Kerber at Air Flow Performance for the kick *** heads.
Let me know what you guys think!
03-15-2009, 02:00 AM
#1036
Looks like a nice set up Nate, when do we get to see some numbers?
So I dropped the transmission today and replaced my leaky rear main seal, looks like who ever put it in didnt set it in all the way. Ofcourse when putting it back together I find my transmission dip stick seal is torn. Doubt I'm gonna find one of those local plus the trans has to be loose from the engine to get the dam tube out all the way, ****** hell. These things happen.
So I dropped the transmission today and replaced my leaky rear main seal, looks like who ever put it in didnt set it in all the way. Ofcourse when putting it back together I find my transmission dip stick seal is torn. Doubt I'm gonna find one of those local plus the trans has to be loose from the engine to get the dam tube out all the way, ****** hell. These things happen.
03-15-2009, 12:40 PM
#1037
TECH Fanatic
iTrader: (9)
Join Date: Nov 2006
Location: Fresno, California
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
Looks like a nice set up Nate, when do we get to see some numbers?
So I dropped the transmission today and replaced my leaky rear main seal, looks like who ever put it in didnt set it in all the way. Ofcourse when putting it back together I find my transmission dip stick seal is torn. Doubt I'm gonna find one of those local plus the trans has to be loose from the engine to get the dam tube out all the way, ****** hell. These things happen.
So I dropped the transmission today and replaced my leaky rear main seal, looks like who ever put it in didnt set it in all the way. Ofcourse when putting it back together I find my transmission dip stick seal is torn. Doubt I'm gonna find one of those local plus the trans has to be loose from the engine to get the dam tube out all the way, ****** hell. These things happen.
And ya nate what sort of numbers/times are you going to be making with the new motor?
03-17-2009, 02:20 PM
#1040
UPDATE 3-17:
Nate pulled my engine apart and saw that it needed a fresh align hone and mains shrunk.....thanks to my POS converter pushing on the thrust. Bill is doing the machine work this week and if all goes well I will be out there this weekend helping, okay watching
him re-assemble it!
Nate pulled my engine apart and saw that it needed a fresh align hone and mains shrunk.....thanks to my POS converter pushing on the thrust. Bill is doing the machine work this week and if all goes well I will be out there this weekend helping, okay watching
him re-assemble it!