New Engine Pics
New Engine Pics Since I had to add a vacuum system on Jens car, due to high crankcase pressures, I decided to dress up the engine bay a bit. I still need to do a lot to it to make it look how I would like. So I added the Mr. Gasket Evac-system, GMPP Cast Valve Covers, Taylor (blue, Jen's choice 
) spark plug wires and separators, and relocated the coils under the cowl. I also cleaned up the harness for the injectors, rerouted then behind the fuel rails for a cleaner look. What do you guys think (click on images to see larger pics)?
) spark plug wires and separators, and relocated the coils under the cowl. I also cleaned up the harness for the injectors, rerouted then behind the fuel rails for a cleaner look. What do you guys think (click on images to see larger pics)?
Trending Topics
A LOT! The passenger's side was soaked with oil coming out of the OEM valve cover, it would just spray the heck on to the radiator. It got so bad that the valve covers started to leak as well. 
This "should" cure it ... I hope. I kind of tested it and no leaks so far.
This "should" cure it ... I hope. I kind of tested it and no leaks so far. LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
I am going to check other things, might as well add that one. 
