Phoenix F-Bodies FTW! *Week 4 6-12-06*
#682
Originally Posted by Smartass6885
Still got it. Pretty sure it is going to stay in there. I got the pass. side head pulled off and when i pull the lifters out i can see the lobes and stuff and everything "looks" Ok. still not sure if i am goin to just throw some new heads on there and hope the #6 piston doesnt fall apart, or pull the motor and have it built. If pull the motor i will go with a bigger cam. Somthing like the AZPS03 probably. not sure what to do yet.
But if u get an F13 cam get a brand new one. Soem of the ones in the past had an imperfection in the cores that made them fall apart. But the problem has been fixed and the cam makes excellent power. Mine made 396rwhp with stock pulley and stock TB. Would probably make 405 or so with the pulley and TB.
-Blaze
But if u get an F13 cam get a brand new one. Soem of the ones in the past had an imperfection in the cores that made them fall apart. But the problem has been fixed and the cam makes excellent power. Mine made 396rwhp with stock pulley and stock TB. Would probably make 405 or so with the pulley and TB.
-Blaze
And please don't pay 3,000$ to have an AZPS03 installed...It's nothing more than a copycat G5X3...They can hum you all they want on how it makes more power or whatever...But all that is just hummage...And I don't like to be hummed...
#683
On The Tree
Join Date: May 2006
Location: Avondale AZ
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 85Silverado454
sorry to hear about your car man....suck how in todays society you can never really have anything...because some people will do everything to **** it up!...its a damn shame!
#684
7 Second Club
iTrader: (7)
Originally Posted by WsSickLs6
And please don't pay 3,000$ to have an AZPS03 installed...It's nothing more than a copycat G5X3...They can hum you all they want on how it makes more power or whatever...But all that is just hummage...And I don't like to be hummed...
Blaze, either way that cam is made for a max effort setup, you will need the good big heads, big intake, and big exhaust for it to perform. That cam with all the rest of the goodies made 485 rwhp on a stock bottom end through a 12 bolt in a local f-body. I would not leave that piston in there or those heads either. And find out what caused it to run that lean, bad injector?
Last edited by NicD; 06-18-2006 at 10:05 PM.
#685
SPAM HUNTER
iTrader: (19)
Join Date: Jan 2004
Location: NM
Posts: 4,100
Likes: 0
Received 0 Likes
on
0 Posts
Yeah my trucks driverside door was kicked...it either happened at the senior party or while i was at school...i didnt notice it until the next day though so i couldnt file a police report. Its about a 800 dollar fix...but i got a huge portion of it out. 800 bucks could go for a motor first...IMO thats FTW!
#686
Originally Posted by NicD
I know the specs on both, and there is not a single spec that is the same. Stick to what you know and stop spreading bullshit. And why would you say $3000 for that cam installed? That is rediculous and I know it is not that much for the cam and the install.
Blaze, either way that cam is made for a max effort setup, you will need the good big heads, big intake, and big exhaust for it to perform. That cam with all the rest of the goodies made 485 rwhp on a stock bottom end through a 12 bolt in a local f-body. I would not leave that piston in there or those heads either. And find out what caused it to run that lean, bad injector?
Blaze, either way that cam is made for a max effort setup, you will need the good big heads, big intake, and big exhaust for it to perform. That cam with all the rest of the goodies made 485 rwhp on a stock bottom end through a 12 bolt in a local f-body. I would not leave that piston in there or those heads either. And find out what caused it to run that lean, bad injector?
Wait, better yet, drop it...Don't know, don't care either...I'm not a liar, and neither are you, just leave it at this...Must have been some misunderstanding...
PS, why do you know the specs of a cam that is top secret???
#688
but still, it's like buying a pair of pants without a size on them...It's only fair to know what i'm buying...And who has time/money for a cam doc??? Why not just advertise and be done with the bullshit...
But whatever, the results speak for themselves...Could probably sell a few more if people knew exactly what they were getting though...
But whatever, the results speak for themselves...Could probably sell a few more if people knew exactly what they were getting though...
#690
Hostility??? NO
I don't care in the least...Just hate seeing people bitch over something that they don't have any clue about...Like in cam vs. cam threads, if we all knew the specs, idiots would then be able to make their choices...
But what do I know, my car is slow...I'm no longer entitled to an opinion...
I don't care in the least...Just hate seeing people bitch over something that they don't have any clue about...Like in cam vs. cam threads, if we all knew the specs, idiots would then be able to make their choices...
But what do I know, my car is slow...I'm no longer entitled to an opinion...
#692
Banned
iTrader: (7)
Join Date: Sep 2005
Location: PHX az
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
i just now saw the thread that guy made mocking us... whats his name??? something like manjuice or something?
anyways, that guy tries way to hard to insult people, and hes not even funny at that... in result, i guess he just sucks at life
anyways, that guy tries way to hard to insult people, and hes not even funny at that... in result, i guess he just sucks at life
#693
SPAM HUNTER
iTrader: (19)
Join Date: Jan 2004
Location: NM
Posts: 4,100
Likes: 0
Received 0 Likes
on
0 Posts
Well there are those people who just trash talk...you dont know them...have never seen them...BUT OH MAN do they know you!!!...so they **** talk...i say...punch the pansy in the mouth...tell him he has a pretty mouth...lol!
#694
7 Second Club
iTrader: (7)
Originally Posted by WsSickLs6
So, when I emailed them and asked about it, why did they tell me the cam specs were the same as the G5X series of cams??? And why was I quoted $3,300 for a head and cam install???
Wait, better yet, drop it...Don't know, don't care either...I'm not a liar, and neither are you, just leave it at this...Must have been some misunderstanding...
PS, why do you know the specs of a cam that is top secret???
Wait, better yet, drop it...Don't know, don't care either...I'm not a liar, and neither are you, just leave it at this...Must have been some misunderstanding...
PS, why do you know the specs of a cam that is top secret???
I know the specs because I tune a lot of them and have seen the "cam cards".
As far as being hostile, yea right. Hostile on the internet.
#695
Originally Posted by NicD
What does a quote for $3300 for a head and cam install have to do with what you said earlier? You said $3000 for an azps03 install, more than just a little different. I would love to see the email where they told you the cam specs were exactly the same as the G5X line of cams seeing as how that would be very stupid, unbelievable, and incorrect. And don't tell me what to drop either, a big peeve of mine is blatant bullshit and I call it when I see it.
I know the specs because I tune a lot of them and have seen the "cam cards".
As far as being hostile, yea right. Hostile on the internet.
I know the specs because I tune a lot of them and have seen the "cam cards".
As far as being hostile, yea right. Hostile on the internet.
#696
Originally Posted by NBMgreg
i just now saw the thread that guy made mocking us... whats his name??? something like manjuice or something?
anyways, that guy tries way to hard to insult people, and hes not even funny at that... in result, i guess he just sucks at life
anyways, that guy tries way to hard to insult people, and hes not even funny at that... in result, i guess he just sucks at life
#700
Originally Posted by 85Silverado454
Now dont change the subject...i am so going to beat you in my Silver Bullet...lol...j/m!
If i win, you have to do something special...