CME Valance
#101
Thread Starter
TECH Fanatic
iTrader: (39)
Joined: Mar 2005
Posts: 1,513
Likes: 0
From: Central Cal - Merced County
Originally Posted by KissMySS98
Great Job Handling This Whole Rear Valence Project, Please Notify Craig Sternberg When They Are Ready, He Is Patiently Waiting With A Set Of Tips!
#102
LOL...nope! That would be me!
That's my buddy Neil. I bought my SS off of him and was telling him about this thread this morning.
I'll take one when they're ready...assuming I haven't bit the bullet to get another one in the meantime. I have the tips...just need the valence.
That's my buddy Neil. I bought my SS off of him and was telling him about this thread this morning.
I'll take one when they're ready...assuming I haven't bit the bullet to get another one in the meantime. I have the tips...just need the valence.
#104
Originally Posted by 98redM6
Right on. Just waiting on an update from Blown383 and the fitment on his car, whenever he gets a chance.
-B
#107
Thread Starter
TECH Fanatic
iTrader: (39)
Joined: Mar 2005
Posts: 1,513
Likes: 0
From: Central Cal - Merced County
Some pictures of the valance installed on Blown383's bumper. It looks like they used silicone or something. It looks good. I would like to see it painted though. I think once it is painted, it'll make it blend better.
#109
Thread Starter
TECH Fanatic
iTrader: (39)
Joined: Mar 2005
Posts: 1,513
Likes: 0
From: Central Cal - Merced County
I don't want to give out dates because there can always be a setback, but it should be ready now. They got it testfitted already and if people are happy with it, then it is ready. Eric was happy with it and Blown383 can chime in on the fitment when he has time.
#113
Originally Posted by 98redM6
$300 shipped
Has anyone built that corsa syle quad tip yet?
#114
Thread Starter
TECH Fanatic
iTrader: (39)
Joined: Mar 2005
Posts: 1,513
Likes: 0
From: Central Cal - Merced County
Pick up should be $250. Also I believe Blown383 has a '97 so this should fit all 93-02 Camaros.
The Corsa style tips could be made to fit. The 90* bends just need to be made earlier in the exit.
The Corsa style tips could be made to fit. The 90* bends just need to be made earlier in the exit.
#115
hello, I'm actually the one developing the rear cme valance. the project is done and just waiting on a few things before I can post the group buy thread up =)
fitment is TOP =) I'll be posting better pictures shortly
- Eric
fitment is TOP =) I'll be posting better pictures shortly
- Eric
#116
wow I just read this thread. Alot of interest here =)
Sorry for not keeping everyone updated and thank you everyone for keeping the threads alive.
I've been swampped with my car after a VERY VERY bad experience with a pretty well known paint shop especially to the LS1 Community.. As well as an upcoming site and working on a few pieces for the G35 Coupes as well and getting ready to make a full kit for the Infiniti G37s =).
I should become a vendor shortly although there may be an issue with me having 0 posts =P we'll see tho =) I've already pre-wrote the threads and Pictures are uploaded as well. I cant wait to keep everything going and once again sorry about the delay. our month long job turned into 4 months!! =( we originally tried to save the authentic CME valance by replicating it without damaging it but that became almost impossible so we ended up buying our beloved valance from its owner =\ its okey i told them to hold on to the pieces so yeah =\
Anyways the project is complete =) Also have a replica urethane JP Visage kit =)
Sorry for not keeping everyone updated and thank you everyone for keeping the threads alive.
I've been swampped with my car after a VERY VERY bad experience with a pretty well known paint shop especially to the LS1 Community.. As well as an upcoming site and working on a few pieces for the G35 Coupes as well and getting ready to make a full kit for the Infiniti G37s =).
I should become a vendor shortly although there may be an issue with me having 0 posts =P we'll see tho =) I've already pre-wrote the threads and Pictures are uploaded as well. I cant wait to keep everything going and once again sorry about the delay. our month long job turned into 4 months!! =( we originally tried to save the authentic CME valance by replicating it without damaging it but that became almost impossible so we ended up buying our beloved valance from its owner =\ its okey i told them to hold on to the pieces so yeah =\
Anyways the project is complete =) Also have a replica urethane JP Visage kit =)
#117
Great! I cant wait to get mine. I have been on that list for months now and am glad that this project came through. Please keep me updated on the progress of this and if and when I can purchase one.
98redm6, im from nor. cal and talked to you before about possibly picking one up for me to when you go down south. is this still an option? if not, no worries as I can pay for shipping too...
98redm6, im from nor. cal and talked to you before about possibly picking one up for me to when you go down south. is this still an option? if not, no worries as I can pay for shipping too...
#118
Originally Posted by Klumzyee
hello, I'm actually the one developing the rear cme valance. the project is done and just waiting on a few things before I can post the group buy thread up =)
fitment is TOP =) I'll be posting better pictures shortly
- Eric
fitment is TOP =) I'll be posting better pictures shortly
- Eric