dyno #s must see
03-23-2008, 12:44 AM
#25
Teching In
Join Date: May 2005
Location: San Diego
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
If you have a LS6 block, even if you have LS1 heads, does that mean you have a LS6 cam? if so, I can see how you got those numbers. It might be a 'stock' LS6 cam, but that's a lot more agressive then the LS1 cam.
03-23-2008, 01:45 PM
#30
Launching!
iTrader: (13)
Join Date: May 2007
Location: Prunedale CA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
nice #'s man! people didnt believe me til i posted my dyno up, they were even talking alot of **** to me about lying since my #'s were on a dynojet lol. dynopacks will read a little high and like someone said make sure you have the 1 at the bottom to ensure that those are corrected #'s that compensate for the little bit of power not lost by having wheels on the car. rotating mass like your wheels, tires, and brakes are resposible for a pretty good amount of horsepower, thats why some people dont like using a dynopack. but in the end the dyno is only a tuning tool to get the car running properly, the car still has to get down the track for those #'s to matter. conrats though! should surprise alot of people
03-23-2008, 04:12 PM
#32
i wonder this because the car was pretty much untouced when i got it(not even lid or tune etc...)
i have always heard that dynopack are one of the most accurate when it comes to dyno # ?
03-23-2008, 09:34 PM
#34
TECH Apprentice
iTrader: (7)
Join Date: Jan 2003
Location: socal
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
the block is suppose to be stronger than the regular ls1 block but other than that there is no real benefit if any. Like said before you may have a stealth cam that you don't know about, run it at the track and see how it does.
03-24-2008, 12:55 AM
#36
ok well i have never claimed that i have a ls6 engine!!!my sig says ls6 and yes i do have an ls6 block
and i well take it to a track soon but i nees a better driveshaft,torque arm and some slicks first so if anybody wants to donate these items i can get you times much faster
03-24-2008, 01:27 AM
#37
my car put down 380 rwhp today after rob a strictly did a dyno tune (ill post graph and video later)!!!
to my knowleage my car only has lt,ory,cutout,85mm tb,lid
plus this is with my 9 inch rear that suppose to steal power
rob said that i might have some kinda cam but the car idels completly stock and really i have no idea
anybody have a clue as if my car has a cam and what it could be??
to my knowleage my car only has lt,ory,cutout,85mm tb,lid
plus this is with my 9 inch rear that suppose to steal power
rob said that i might have some kinda cam but the car idels completly stock and really i have no idea
anybody have a clue as if my car has a cam and what it could be??
dyno
http://youtube.com/watch?v=GdTQT6ZSMNo
runs
http://www.ls1gto.com/forums/showthread.php?t=228082
03-24-2008, 01:28 AM
#38
ok well i have never claimed that i have a ls6 engine!!!my sig says ls6 and yes i do have an ls6 block
and i well take it to a track soon but i nees a better driveshaft,torque arm and some slicks first so if anybody wants to donate these items i can get you times much faster
