ss.slp.ls1

iTrader: (36)

When I did the mounts on Hlaalu's car, we had the car on (2) six-ton jack stands in the front and on ramps in the back.

pweterss

iTrader: (3)

i need some therapy,can you help with that??lol jk ive been wanting to do a cam install,what do say good sir??

Revelation Z28

iTrader: (10)

"you need many years of therapy, many many.. ******* years of therapy"

pweterss

iTrader: (3)

^^^^i had to ask,otherwise im gonna spend alot of money on a therapist that i would rather put in my car!!!lol

ss.slp.ls1

iTrader: (36)

I'll give you a good price...100 bucks a hour.

I'll help you with that. Just let me know when.

pweterss

iTrader: (3)

sweet thanks, i just need to figure out how big of a cam i want...... hhmmmm

pweterss

iTrader: (3)

TONIGHT i drink!!!!!ill try to get some drunk pics,those are always funny *** ****!!!lol

ss.slp.ls1

iTrader: (36)

Poly motor mounts installed.

Unfortunately, we had to remove his headers, which added alot of time to the install.

LS1BLKSS

iTrader: (36)

you can say that again!!!

ss.slp.ls1

iTrader: (36)

Which added ALOT of time to the install.

WS6_Suicide_Machine

iTrader: (6)

ya i herd that was a 12 hour job!!! wtf!!!

i was gonna have you guys help with the motor swap, but i dont have a free week!

ss.slp.ls1

iTrader: (36)

There were a several hang-up along the way, the worst being that his y-pipe fought to the death before coming off the headers and catback. We had to make a couple of trips to the store to make the trans mount work. etc. etc.
The actual motor mount install didn't take that long, just gaining access to them was the hard part.

LS1BLKSS

iTrader: (36)

^^^ the mounts themselves where like a 30min install! lol

Teal94Z

well i need to replace my cap and rotor on my opti never done it before (even though it seems pretty easy) so i could use some help. i live in chino not too far from fullerton.

ss.slp.ls1

iTrader: (36)

I can help you with that, but if the opti is original, I strongly suggest you swap in a whole new unit and not just a new cap and rotor.

LS1BLKSS

iTrader: (36)

damn noise didn't go away... im going to have to remove that gasket and check it out!!

ss.slp.ls1

iTrader: (36)

Did you double check everything to make sure it was all tight?
Exhaust manifold bolts, sparkplugs, o2's, clamps...?

LS1BLKSS

iTrader: (36)

yep! everything is tight... car drives like there isn't antying wrong with it!

LT Chevyboy

iTrader: (1)

Where's leak coming from, passenger side or driver side? Did you thoroughly scrape the heads free of the old gaskets?

Teal94Z

na it was replaced like 30k ago, i ordered the cap and rotor friday and it should be at my house on tuesday ill pm you my # if you want to help.