98 Camaro - Whats it worth
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Jun 2009
Location: Florence, Al
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
98 Camaro - Whats it worth
Looking to put my cammed 98 Camaro z28 up for sale. It has a cracked windshield, and some VERY minor sun damage on the wing. 149k miles
Auto Yank3600 stall
MS4 Cam
Hardened Pushrods
.675 lift valve springs
LS7 lifters
Pacesetter Longtubes w/ Dynomax Bullets dumped
Ported/shimmed LS6 Oil Pump
rollmaster double roller timing set
titanium seats/seals/retainers
Victor Jr Intake w/ Carb Style FAST Throttlebody
VFN Cowl Hood
Sparco Bucket Seats
4.10 gears, rear end has a small hint of whining, but has never been launched on drag radials/slicks.
Ran 7.8 with just a stall and headers on good street tires. I am sure it can get into the 6's with some tire.
Car makes around 440whp, and needs a touch-up tune since the Intake was changed from a LS6 Intake. I am sure I am forgetting some mods, but I took the stripes off, and it will be sitting on stock T/A rims.
http://www.youtube.com/watch?v=Qp3Pm...el_video_title
Thanks,
Greg
Auto Yank3600 stall
MS4 Cam
Hardened Pushrods
.675 lift valve springs
LS7 lifters
Pacesetter Longtubes w/ Dynomax Bullets dumped
Ported/shimmed LS6 Oil Pump
rollmaster double roller timing set
titanium seats/seals/retainers
Victor Jr Intake w/ Carb Style FAST Throttlebody
VFN Cowl Hood
Sparco Bucket Seats
4.10 gears, rear end has a small hint of whining, but has never been launched on drag radials/slicks.
Ran 7.8 with just a stall and headers on good street tires. I am sure it can get into the 6's with some tire.
Car makes around 440whp, and needs a touch-up tune since the Intake was changed from a LS6 Intake. I am sure I am forgetting some mods, but I took the stripes off, and it will be sitting on stock T/A rims.
http://www.youtube.com/watch?v=Qp3Pm...el_video_title
Thanks,
Greg