1993 Z28 Camaro (fresh motor, trans and paint)
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just curious where to set my price at if I choose to sell
Fresh motor bored .030 over
226/232 .576/ .571 110
Performabuilt 700r4 street/strip kit trans
Revmax 3600 stall
B&M trans cooler
Stainless OBX lts
Stainless ory with a dumped dynomax bullet
Stock heads milled .020 new valve seals
Howards springs
Comp pro mag 1.6rrs
New rings and pistons
New oil pump with bolt on pick up with white spring mod
New gaskets throughout
New BMR lowering springs
New upper ball joints
New Bilsteins shocks
Fresh paint on outside (didn't do jambs or engine bay)
Needs a new headliner ~$250
Some surface rust on radiator support
rear window needs to be retinted
I'm sure I'm forgetting a lot.
Everything has ~250 miles on it.
Car has 135,xxx miles
Fresh motor bored .030 over
226/232 .576/ .571 110
Performabuilt 700r4 street/strip kit trans
Revmax 3600 stall
B&M trans cooler
Stainless OBX lts
Stainless ory with a dumped dynomax bullet
Stock heads milled .020 new valve seals
Howards springs
Comp pro mag 1.6rrs
New rings and pistons
New oil pump with bolt on pick up with white spring mod
New gaskets throughout
New BMR lowering springs
New upper ball joints
New Bilsteins shocks
Fresh paint on outside (didn't do jambs or engine bay)
Needs a new headliner ~$250
Some surface rust on radiator support
rear window needs to be retinted
I'm sure I'm forgetting a lot.
Everything has ~250 miles on it.
Car has 135,xxx miles
![](http://i571.photobucket.com/albums/ss158/mcalus/Mobile%20Uploads/IMG_6344.jpg)
Last edited by mcalus; 06-10-2012 at 06:51 PM.