rear greg welds
Thread Starter
11 Second Club
iTrader: (16)
Joined: Feb 2006
Posts: 1,865
Likes: 0
From: Cape Girardeau, MO
rear greg welds I asked this in another thread..but no responses, and I need to know asap. Ive already clearanced my calipers for 15x8 prostars will 15x10 GWs fit also?
You need to go down to LT1 brakes and grind the **** out of them. Or go to a strange rear caliper and add a small spacer 3mm to clear the strange caliper. This is as per another member in the other thread, he said it was still very close and he may grind the corner of the caliper a lil still.
they are alot worse than regular prostars. i too have rear strange drag brakes and even with a 1/4" spacer, i had to grind the calipers and the part of the brake pad that the pin goes through. pissed me off. and i only have the 15x8's with a 4.5 backspace on my car (narrowed rear). i would imagine it would be worse with the 15x10 and more backspacing. here they are on my car
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
11 Second Club
iTrader: (16)
Joined: Feb 2006
Posts: 1,865
Likes: 0
From: Cape Girardeau, MO