Pics of After Market Rims on Red Trans Am's!!!
#67
Here are a couple of photos of my 93 Trans Am that was given to me. It was previously owned by some shop in AZ that sold aftermarket parts (hence on the decals) and had a cage in it etc. It was then sold to a friend and that is how I ended up with a free car when he was done with it. When I got it, the hood had a huge hole in it that was cut out by a plasma torch so there was no saving it. I got this black Hood and new BMR Lower Control arms for $125 off of Craigslist so there was no passing up the deal. The hood doesnt quite fit right so I will have to do a bit of grinding on the hinges to make it sit back about 3/16"-1/4" to allow the front to clear the nose piece when also needs repair/replacement. The paint is jacked as well along with the dent from a gate that swung open and hit the rear quarter panel. All are issues I can deal with on an 88,000 mile free car, lol!
Joe
Rims are Ronal 18 x 9.5" on all for corners with 275/40/18 tires. I will be looking for some 285/45/18's for the rear to test fit them in the future.
Joe
Rims are Ronal 18 x 9.5" on all for corners with 275/40/18 tires. I will be looking for some 285/45/18's for the rear to test fit them in the future.
#77
TECH Enthusiast
iTrader: (1)
Join Date: Jun 2010
Location: Arkansas
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
C6 Wheels
These were on my car when I bought it. Car is dirty and I had only had it a couple days. Sorry for the bad quality pics
here is my current setup. Prolly gonna switch to C6 Z06 in chrome this summer
here is my current setup. Prolly gonna switch to C6 Z06 in chrome this summer
Last edited by LS1WS6dreamer; 08-02-2012 at 05:46 PM.
#80