1Clean98Z28

BKsNHRA

iTrader: (4)

18x8.5 18x9.5. 285/40-18 on rear. I think they were 235/35 up from but may have been 245. I'd have to go look. Can't remember.

2JAWZ

iTrader: (1)

Carolina Bandit

My 94 Z28 with a roller paint job

Boxxx

17x9.5 front and back with 275/40 Sport COMP-2's.

dailydriver

^^^Most people on here HATE those 'turbine' wheels, but I personally think that looks good, and it IS different.

I even like the earlier 'disc' C4 wheels, which everyone hates on even more yet.

Boxxx

Thanks! I like them, I think they go with the aesthetics of the '93-97 Firebird pretty well. More so than the Corvette they originally came off even, I dare say.

Double-aught_Z/28

iTrader: (11)

Finally got my Z06 wheels on a couple weeks ago, still no good pics yet though. They're OEM polished C6 Z06 speedlines. I went with a set of four 18x9.5 fronts though instead of cramming the 19x12s in. No hammering required this way. Finished off with a set of 275/35 Nitto NT555 G2s.

bigbomber5

Looks good, now remove that hideous side molding

badtzmarui

iTrader: (1)

wesst

iTrader: (1)

Are those OEM C5 wheels above? If so, are you running any spacers with those? They look fantastic!

dojob

those look like 17x9.5 front, 18x10.5 rear... if they're oem they shouldn't with those specs, depending on how low you are.

I have oem 18x10.5's on all four corners and i trimmed the rear bumpstop brackets for security's sake

wesst

iTrader: (1)

Not trying to hijack this thread, but would you be able to post some pics of OEM ZO6 18x10.5 on all four corners?

2JAWZ

iTrader: (1)

The Post before yours. He does. Look him up.

dojob

https://ls1tech.com/forums/chevrolet...ld-thread.html

King23

iTrader: (4)

Carguy8888

iTrader: (1)

17" C6's around, NYC roads are not so kind.

dconway90

LOOK good

badtzmarui

iTrader: (1)

I am running a square 18x10.5 OEM Z06 setup on my car. I run a 1/4" spacer up front and 3/8" in the rear. I have a Brembo BBK in the front. I test fit the front without the spacers and it seemed to clear, but chose to run them for insurance. Hope this helps.

RollinSScamaro

iTrader: (25)

Deep dish c6 z06 wheels