Got OE Wheels? We need your Images *DON'T QUOTE PICS!
04-19-2014, 01:14 PM
#2941
Teching In
Join Date: Jul 2010
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Hey Hodge, Love that setup. Did you have to modify the fender at all?
Do you happen to have a link to those? I can't seem to find the 19's.
Do you happen to have a link to those? I can't seem to find the 19's.
Last edited by Blksnshn; 04-19-2014 at 01:30 PM.
04-19-2014, 04:48 PM
#2942
12 Second Club
iTrader: (5)
Join Date: May 2009
Location: pooler, ga
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
my fenders are rolled and i have 1" spacers on all 4 corners. just the rears are 19's and you wont find them in all black like that. i had them powder coated.
04-28-2014, 01:43 PM
#2944
On The Tree
Join Date: Apr 2013
Location: Temple, TX
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
C6 ZO6 Deep Dish. Got them on and finally got a weekend to clean up the TA. Whole experience with OE Wheels was top notch. 17x9.5 up front and 18x10.5 out back. Need to do something with the center caps though...
I am going to follow the advice of crimson_bird and get some spacers on all four corners and roll the fenders so when I am up for new tires I can cram some 305 back there.
I am going to follow the advice of crimson_bird and get some spacers on all four corners and roll the fenders so when I am up for new tires I can cram some 305 back there.
Last edited by Brutal Boba Fett; 04-28-2014 at 01:53 PM.
04-28-2014, 05:12 PM
#2945
LS1Tech Platinum Sponsor
iTrader: (6)
Join Date: May 2009
Location: sarasota,fl
Posts: 1,333
Likes: 0
Received 0 Likes
on
0 Posts
They are removable and they are blanks.
: thanks for posting pics and thanks for your business 
When will the black C6 Z06's with the machined face be back in stock again?
http://www.oewheelsllc.com/Wheels_3/...T#.U02goU2PKUk
http://www.oewheelsllc.com/Wheels_3/...T#.U02goU2PKUk
They are coming back in stock the 2nd week of May.
Good looking car!! thanks for posting pics and thanks for your business
Great looking vehicle
thanks for posting and thanks for your business 
: Plus shipping.Great looking car
: thanks for posting your pics and thanks for your business Great looking ride
thanks for posting pics and thanks for your business !!
__________________
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
05-04-2014, 07:44 PM
#2947
Teching In
Join Date: Mar 2013
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Possible rubbing? Just got my 18x10.5" and the 18x8.5' from OEWHEELS. Service was top knotch Lance really helped out a lot. I have a fitment issue though. I see everyone runs the 10.5"'s in the rear with no modification. I put mine on today before the tires were put on them and it looks like its going to rub on the piece that hits the axle if you bottom out. I can barely fit a piece of paper between the wheel and the bumper thing. Anyone else have this issue
What do I do? Will it be worse with a tire on it?
What do I do? Will it be worse with a tire on it?
05-04-2014, 08:30 PM
#2948
On The Tree
iTrader: (2)
Join Date: Oct 2011
Location: Abilene, TX
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
from what I read a lot of people grind that lip back to avoid hitting it...if jacking up from the frame may have to jack up the differential as well then back and forth to get on the ground if lowered.... should fit inbetween wheel once on the ground but grinding is safe from what I have read....gl
05-04-2014, 08:39 PM
#2949
Staging Lane
iTrader: (5)
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Lift the axle and see if it fits at ride height. Many rims over 10" do not clear the bump stop at full droop. Just remember to pull the wheels before letting the rear fully drop and you will never have an issue.
05-07-2014, 05:15 PM
#2953
Teching In
Join Date: Aug 2013
Location: S.C.
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
C6 ZO6 Deep Dish. Got them on and finally got a weekend to clean up the TA. Whole experience with OE Wheels was top notch. 17x9.5 up front and 18x10.5 out back. Need to do something with the center caps though...
I am going to follow the advice of crimson_bird and get some spacers on all four corners and roll the fenders so when I am up for new tires I can cram some 305 back there.
I am going to follow the advice of crimson_bird and get some spacers on all four corners and roll the fenders so when I am up for new tires I can cram some 305 back there.
05-07-2014, 08:56 PM
#2954
TECH Enthusiast
Join Date: Jun 2005
Location: Wichita, KS
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know if OE Wheels still makes the 18x9.5 Silver 5 spoke C6 wheels? I see they have the 19x10's, but nothing smaller. I sent them an email, but never got a response back. Jegs.com has them, but when I called them this afternoon, they said they were no longer available.
05-09-2014, 11:33 AM
#2955
I like the wheels alot. I am still waiting for the center caps though. For some reason the box said "center caps to follow shortly" and it's been close to a month with no caps 
. Hope to get them soon. The wheels literally could not be even a mm wider, it took some trickyness loading the suspension to get them to clear the bumpstops, even after taking a sawzaw to trim the stops 
.
C5 Deep Dish Chrome staggered (17x9.5 up front, 18x10.5 out back)
Also, I had c6 z06 wheels that I just took off from OEwheels. Also good wheels but wanted to try a new style.
. Hope to get them soon. The wheels literally could not be even a mm wider, it took some trickyness loading the suspension to get them to clear the bumpstops, even after taking a sawzaw to trim the stops .C5 Deep Dish Chrome staggered (17x9.5 up front, 18x10.5 out back)
Also, I had c6 z06 wheels that I just took off from OEwheels. Also good wheels but wanted to try a new style.
05-13-2014, 06:22 AM
#2956
Staging Lane
18X9.5 - 275/35/18s
thought they were too deep in the wheel well with 58mm offset - so installed eibach 15mm spacers on the rear and switched to black lugs - second shot is finished look.
thought they were too deep in the wheel well with 58mm offset - so installed eibach 15mm spacers on the rear and switched to black lugs - second shot is finished look.
05-28-2014, 10:09 AM
#2958
Am I the only one having difficulty getting ahold of these guys? Sent three emails directly through their website over the past three weeks. No response. Just trying to order a set of wheels here, but the lack of response seems troubling.
05-28-2014, 10:59 AM
#2959
TECH Resident
They seem to be busy. It took them a little bit to get in touch with me (a few emails, a few voicemails over a few days),but when they finally got in touch I had a good experience
05-29-2014, 11:02 AM
#2960
TECH Enthusiast
Join Date: Jun 2005
Location: Wichita, KS
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
OEWheels must be really popular-- it looks like you are out of stock on a lot of wheels right now! Any idea when you will get these back in stock?
UPC# - 9223854
18" Camaro - Corvette C5 Wheels - Black 18x9.5 SET
UPC# - 9223854
18" Camaro - Corvette C5 Wheels - Black 18x9.5 SET