6spdchevy

iTrader: (2)

that would be nice, but all of there wheel packages are designed for fitment without lowering, and without spacers to accomadate our f-boys. For them to include all the following info would require more research on the members veheicles because everyone has a different wheel setup along with different tire sizes.

i actually think we should start a new thread (pics and info only no comments because that usually clutters the threads) with o.e. wheels and maybe other wheels too for members to post up there current wheel setup and include a pic and info on how the wheels were fitted properly to the car. (lowering springs, spacers, studs, lugs, tire size, rim size, bfh, etc.)

OEWheelsLLC

iTrader: (6)

^^ + 1

dont forget you can post your images on our website and leave a review :

ELDIABLO

iTrader: (28)

I just left a review and uploaded a couple of pics. I'll post them here too. I wish you guys would make these in a 18 for the fronts. Either way they still look sick to me.

OEWheelsLLC

iTrader: (6)

[QUOTE=ELDIABLO;14050450]I just left a review and uploaded a couple of pics. I'll post them here too. I wish you guys would make these in a 18 for the fronts. Either way they still look sick to me.


Excellent photos : thanks for posting and thanks for your business

dubga

iTrader: (8)

ElDiablo...that looks awesome!!! Especially the first pic. I like how it looks a little higher in the back but the wheel wells are all fully filled. Please post specifics of your setup...wheel sizes, tire sizes, lowering springs, spacers (if any). That's just the look I want.

6spdchevy

iTrader: (2)

agreed that looks killer

9WhiteCamaro9

The NMB SS above looks damn good, minus the rivets. But if mine looked that good I think I could over the rivets though.

ELDIABLO

iTrader: (28)

Thanks guys...
But I really love the rivets, I don't think anyone else has them in chrome around here. Plus they have more of a iforged aeros look vs the non rivet ones have more of a CCW 500 look.

Well it sits on Vogtland springs, with 17x9.5 w/ 275-40-17(front) and 18x10.5 w/ 315-35-18 (rear). The rear tires are Toyo's proxes TQ, and they run a little taller than stock (26.6"). The front of the car is lower because I put a Iron block 6.0 in it. Thats about 80lbs heavier than the stock 346...lol! Im not running any spacers, I just had to do the BFH mod inside the fender well.

OEWheelsLLC

iTrader: (6)

Eldiablo did you post your pics on our website and leave a review yet??

mguidry629

iTrader: (6)

I just ordered my DD C5 18x10.5s on all 4 machined/black with BFG's KDW2 295/35/18 and 275/35/18. It's going to be a long couple of weeks waiting for those to arrive on the doorstep, like a 10 year old waiting for Christmas morning.

I'll post pics when they arrive.

99monguse

I definetly want chrome wheels for my SS and I was thinking about getting the new PERMACHROME (chrome powdercoat with a clearcoat) but the reflection isn't as clear as real chrome but they are FULLY warrantied for 5 years. I purchased a set of chrome 17x9.5/17x11 back in 1996 from another company and the rims were NEVER in salt and were only cleaned with car wash soap...within 4 years the chrome began to pit and peel/flake. The company I got them from said the warranty was 1 year; so that's my question to you, what is the warranty? What is the policy?


I work at a Mercedes/VOLVO/BUICK dealer and we've gotten aftermarket wheels for our customers in the past and the chrome didn't last. Some of the wheels had to be replaced within a year and the company tried to blame the peeling chrome on the tire bead sealer and cleaning products used on the wheels.

run em down

iTrader: (1)

Got my C5 DD chrome wheels today and my BFGoodrich g-force t/a kdw 2's. 17x9.5 front with 275/40 and 18x10.5 rear with 295/35. Put on a 7/16 inch spacer in the rear so the wheels would sit flush with the fender. Had to cut off the bumpstops for clearance but no other issues besides that.

Wheels look amazing. thanks alot for the help scott, Ill have pics up later this week after I clean her up haha.

ELDIABLO

iTrader: (28)

Yes sir, well atleast I hope they went through.

OEWheelsLLC

iTrader: (6)

I will Pm you. this thread is for customers to post there photos.

cant wait to see the photos :

need more photos of wheels and tires. anyone??

Mrjockos

I'm very intressted in buying some awsome wheels from you, but when I look at the shipping to Sweden, only the shipping and handling would cost me 1000$, on your website, should also say that it is for wheels only, not any tires?

total cost around 1500$.


Don't you offer any other cheaper shipping to Sweden? Would be very thankful if you could check it up for me, like I said, another shipping price, and you have a customer.

greetings Jocke from Sweden.

BlkBird2000

iTrader: (10)

You guys think it's better to go 18s all around or 18 rears and 17 fronts? I really can't decide.

6spdchevy

iTrader: (2)

i'd do 18 all around but i have a camaro, i think with firebirds u can do 17 front and 18 back and still look good, i just dont like the idea of having a different size profile front and back like 275/40 and 295/35 which sometime makes the front tire look bigger than the rear tire it gets to me

$750 L98

iTrader: (7)

I just saw my 1995 black C4 picture up in the C5 Z06 section. It made my heart skip a beat, I lost the car in a wreck a while back and haven't stopped missing it for a second.

Just wanted to thank y'all for putting it up, I miss her dearly, but at least it can be an inspiration for others.

I think I'll be ordering a set of those to go on my '99 Formula.

OEWheelsLLC

iTrader: (6)

sent you a pm on pricing. :

18's front and rear on f bodies.

sorry your car got wrecked that sucks.

RyanB58

Scott,
Do you have Black c6 Deep Dish 18s available??? If so how much shipped to Saint Louis??? 18x10.5 rear and 18x8.5 front
If so Im buying them!!!!