Originally Posted by 10flat

Riding your 17/18 combo

Originally Posted by Giddswat

OEWheels 17x11 Chrome ZR1`s

I was just starting and moving the car for the first time in three months. Originally I was not sure about the deep dish wheels, but after seeing them on the car, I should have done this a long time ago. I don`t think I will have to roll the fenders, but the inner fender-wells will need a little BFH massaging.

http://www. youtube. com/watch?v=Y3aU-Q1-XN4

Originally Posted by 10flat

Riding your 17/18 combo

Originally Posted by ZROCWS6

All of those are OEWheels?

Originally Posted by AwsmGy

Got mine on the other day, haven't had time to take anything other than this cell phone pic.

Originally Posted by Cold06

Got the black C6 Z06 18x9.5

Originally Posted by Mr. Quick

17" all 4 corners

Originally Posted by Photochop

Well I got mine on yesterday but no pics yet. I installed 2.5" ARP wheel studs on the rear and ran a 5/16" spacer to push them out flush with the quarter. I'm running the Toyo R888 315/30/18s out back and had to BFH the inner quarters a bit. I already had an adj panhar bar on the car that was centered. If not, I doubt they'd worked without a lot more effort. I love how they look though. I'd planned on running some hex head open end tuner lugs, but they didnt work out because the ARPs came out too far and I didn't have enough room in the lug to torque them. So, luckily I had a set of old chrome acorns (not sure on the brand) that fit without bottoming out. As far as suspension, my car has slp bilsteins with stock springs all around - 3/4 of a coil cut off the fronts, and the hose mod on the rear. It sits lower than most cars up front due to the turbo kit weight, and my rear springs are pretty old so they're probably a tad more saggy than most. For reference - the top of the front fender is at 26.5", rears are at 27.25" (about 1/4" higher than where the BMR springs put these cars). Took the car for a quick drive yesterday to listen for rubbing, didn't hit any big bumps, but no rubbing that I can tell and I haven't touched the quarter lips (not rolled at all). I'll get pics up in the next few days when this dreary rainy crap clears up.

Originally Posted by Greekey

Oewheels, do you guys c6 z06 rims in stock? Chrome deepdish, no rivets. 18x10.5 rear 17x9.5front

Originally Posted by 99Hawk6spd

Does anyone have input on how well the chrome holds up on these wheels? I'm looking for a set of wheels, but I drive my car about 8k miles a year, and don't want to get chrome if they aren't going to look good for a while.