*02WS6TURK*

iTrader: (13)

Updated DD C5's

Midnight02

iTrader: (8)

OE Wheels C6 Replicas (chrome)
18" x 9.5" in the front
18" x 10.5" in the rear

I'll try to get you a couple pics with a better background but hopefully this will help the NBM Camaro guys get an idea of what they look like.

DSCN1474.jpg?t=1305037773

DSCN1473.jpg?t=1305037732

ls1jorge

iTrader: (5)

^ badass! You just need to get it lowered, then post pics

OEWheelsLLC

iTrader: (6)

I sent you a pm!

your car looks great : thanks for posting pics and thanks for your business

Empatho

iTrader: (16)

HWI

iTrader: (2)

Wheels look good on the car, but is it just me, or does the front look higher than the rear?

6spdchevy

iTrader: (2)

is your car green? anymore pics of this?

looks good

HoLLo

iTrader: (17)

Dibs on blank center caps when they come out!

OEWheelsLLC

iTrader: (6)

looking good : thanks for posting and thanks for your business

ZTwentyAteU

iTrader: (12)

I noticed my old TA was on the site..awesome!

187fl

Just ordered my black Zr1's and wrapped em in Nittos 275 fronts and 285 out back. Scott the representative was very helpful. Shipping was fast. I'm in Phoenix, AZ and received them in less than a week.

19xtreme99

iTrader: (2)

This picture will have to do for now.... terrible weather here in Michigan right now...

I just want to say thank you to Scott - his customer service was excellent through the entire process and definitely went the extra mile to help me out when the tire shop scratched the first set of rear wheels. Thank you OE Wheels! I will highly recommend!

The wheels are C5 Deep Dish 18x9.5" front and 18x10.5" rear with a 275/35/18 Hankook Venture V12 tire on the front and a 295/35/18 Goodyear Eagle F1 Supercar tire on the rear

The car is also lowered on Strano Springs

9WhiteCamaro9

I'm wondering if it's safe to lightly sand on any of the polished wheels y'all have? I have a set of C5's, all polished and was wondering if I could wet sand em and re-polish them cause they have water spots and I haven't found a polish to get rid of them and wanted to know if I could sand em and re-polish them to get rid of the water spots but not have to worry about messing them up.

187fl

My old wheels had a few spots, I was able to take some of them of with headlight restorer polish and a power ball. Its a heavy cut polish. If you do decide to go with sandpaper start off with really fine grit, see how that goes.

9WhiteCamaro9

Sounds good. All I was wanting was to take a fine grit sand paper to get em off with but just enough to rub over the surface with but not cut to badly into the metal itself cause when I do go over them with polish, it's like the water spots stick out more than they did before.

187fl

It seems it might be some kind of chemical causing this. A lot of tire cleaners or tire shines have PH levels that might leave stains on metal. This might be penetrating really deep. The polish is essentially doing the same thing as sand paper. So I wouldn't worry about using sandpaper as long as you finish off using finer polishes or a finer grit paper. I am polishing my headlights as we speak and using this same process . They weren't that bad, just bored.. Let me know how it goes, I wanna see if you can get those spots out.

9WhiteCamaro9

Ok, will do. It may be next weekend till I can get to it cause of work but I may make a thread and show it. If I do, I'll PM you and let you know.

007nco

waiting for mine to get here, flipped thru near every page here looking for c6 greys w/lip in the 19/18 combo. Gonna wait to lower if needed depending on how the 305/35/19 looks on the back replacing 275/35/17 on stock SS's.

2000NBMWS6

Finally got my OE Wheels!!

Thanks Scott for your help on the phone and through the PMs. The wheels arrived in four days. I got them put on the car that day and I took pictures today.

I think they look great!

OEWheelsLLC

iTrader: (6)

great looking car : thanks for posting your pics and thanks for your business

Thanks for posting your pics and thanks for your business

looking good : thanks for posting pics and thanks for your business