Wheels & Tires Forged | Billet | Cast | Radials | Slicks

315 Sumitomo's on 9.5" Wheel?

Thread Tools
 
Search this Thread
 
Old 01-27-2010 | 05:19 PM
  #1  
brewersprts's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Feb 2009
Posts: 116
Likes: 0
From: Springfield, OH
Default 315 Sumitomo's on 9.5" Wheel?

Ok so I now that sumitomo's run narrow. So if that is the case, will a 315 be able to fit on a 17x9.5 Z06?

I like a staggered look and I just don't think that a 275 in the front and a 285 in the rear is going to look very different.

Anybody tried?
Old 01-27-2010 | 05:26 PM
  #2  
LS199CAMAROZ28's Avatar
Launching!

iTrader: (32)
 
Joined: Oct 2005
Posts: 225
Likes: 0
From: Va
Default

absolutely not
Old 01-27-2010 | 05:56 PM
  #3  
bigj2717's Avatar
TECH Addict
iTrader: (15)
 
Joined: Sep 2005
Posts: 2,062
Likes: 0
From: San Antonio, TX
Default

Yeah i wouldnt do it. i ran them on a set of 17x11s and they looked fine yeah their smaller then my bfgs but i wouldnt think about running them on anything smaller then about 10.5
Old 01-27-2010 | 06:21 PM
  #4  
Jwright41's Avatar
TECH Apprentice
iTrader: (2)
 
Joined: Jun 2008
Posts: 353
Likes: 1
From: Lubbock, TX
Default

This is in the sticky in this section: NOTE: 315 series tires DO NOT fit 9" or 9.5" wheels. It will not be discussed any thread posting will be edited, locked or deleted.

So Im going to have to say no it wont fit.
Old 01-27-2010 | 07:53 PM
  #5  
brewersprts's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Feb 2009
Posts: 116
Likes: 0
From: Springfield, OH
Default

Ya, I saw that after doing some looking. I just know sumitomo's run narrow so it never hurts to ask, i guess delete this thread.
Old 01-27-2010 | 08:14 PM
  #6  
brewersprts's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Feb 2009
Posts: 116
Likes: 0
From: Springfield, OH
Default

I really want some 17x9.5 and 17x10.5 in the back. I hate 17's and 18's. Oh well, that's why I hoped I could put 315's on the back. Too bad nobody makes a 295/35/17
Old 01-28-2010 | 03:48 PM
  #7  
Jwright41's Avatar
TECH Apprentice
iTrader: (2)
 
Joined: Jun 2008
Posts: 353
Likes: 1
From: Lubbock, TX
Default

It was just what I found. Wasnt sure if it would get deleted or not but just giving you a heads up on it.




All times are GMT -5. The time now is 01:33 AM.