Fiske Fm5's On A Lowered '02 Ws6- Questions...
#21
Originally Posted by Eugenio_SS
no need to roller fender for those wheels and Prokits.
I have Prokits, and 17x11 in the back... I have +50mm offset, and I think Fikse uses +49mm offset.
Just need a adj.PHR to move the rear around for centering it.
a BFH will be needed to massage the inner fender.
Pics in signature of the 17x11s with Prokits,
note that I have no rubbing, even at the track with race-rubber in it.
I have Prokits, and 17x11 in the back... I have +50mm offset, and I think Fikse uses +49mm offset.
Just need a adj.PHR to move the rear around for centering it.
a BFH will be needed to massage the inner fender.
Pics in signature of the 17x11s with Prokits,
note that I have no rubbing, even at the track with race-rubber in it.
#22
Originally Posted by up2late76
DUDE! is that your car in the pic? duh, i assume it is, lol. do you have any pics of the car w/ the fm5's and the 315's? i've trying to get as many pics as i can of ws6 'birds w/ that set up so i can get a good visual. so you got any more?????
Rob
#23
The jounce spacer is for 93-97 cars, at least thats what it said on my invoice after I ordered them.... my car is on 10 spoke 17's and the eibach sportlines. if I installed those spacers they would be constantly touching the rear axle
#24
I installed mine had to message the inner fender a LITTLE bit when you pull the wheel off you can see the little bump that it runs on just hit it with a regular hammer a couple of times and presto. This is with Wide Yokahma AVS the Nittos in 315 are not as wide and may not require the clearance. Here is pic of mine
http://home.comcast.net/~moton.b/wsb...--graphic.html
http://home.comcast.net/~moton.b/wsb...--graphic.html