[/IMG] 
Who wideneds wheels?
Who wideneds wheels? I'm looking to get the corvette spyder wheels, but want a 18x10.5 or 11 in the rear, but no one makes them that wide in 18s. So who wideneds wheels, how much does it cost? Sorry, I can't search, I'm using my iPhone since this shifty hotel doesn't offer free wi fi
My buddy had his 10 spokes widened by these guys, came out awesome ... http://www.weldcraftwheels.com/
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
My buddy had his 10 spokes widened by these guys, came out awesome ... http://www.weldcraftwheels.com/
Sent mine friday to (non sponser). Let you know in a few weeks what they look like. I'm adding 3 or 4 inches to my 18x8 coddington's. About 300 a wheel.
Last edited by 1ta2nv2000; Jul 4, 2010 at 04:31 PM.
$300 per wheel is freakin expensive. but that seems to be the going rate. I also want the Spyders in a 18x10.5 but i cant see paying for the wheels and then an additional 300 to get them widened.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
i have been thinking about doin this. so when u widen the wheels, how do u compensate for the offset/backspacing? i know u have to run an adapter, but how do u know which one is right so that the wheels doesnt stick out too much?
12 Second Club
Joined: Feb 2006
Posts: 993
Likes: 3
From: Waukesha,WI
ive been thinkin abotu sending out my two rears of my stockers so i can run the 315 Mickeys i have. just going an inch extra wouldn't make me need a spacer would it? i've also thought about narrowing the fronts for 245's or something up front
Yeah you'd need a spacer. They add to the inside of the wheel, so if you didn't use a spacer the face of the wheel would sit where it does currently. It wouldn't look aggressive at all.
