LS1TECH - Camaro and Firebird Forum Discussion
CHASSIS, SUSPENSION, APPEARANCE
Wheels & Tires
Z06 Wheels: Direct Bolt-in?

Wheels & Tires Forged | Billet | Cast | Radials | Slicks

Z06 Wheels: Direct Bolt-in?

Reply Subscribe

Search this Thread

Old

Jan 24, 2004 | 03:49 PM

#1

Thread Starter

TECH Senior Member

iTrader: (60)

Joined: Apr 2003

Posts: 9,397

Likes: 4

Default

Z06 Wheels: Direct Bolt-in?

I was looking at getting a set of these either off a Z06 or buying them from somewhere else. I think the sizes are 18x10.5 and 18x.9.5. Are the backspacing on them already set so they can do straight onto and F-body? And modifications that need to be done? Thanks

Old

Jan 24, 2004 | 06:53 PM

#2

TECH Senior Member

iTrader: (15)

Joined: Dec 2001

Posts: 8,642

Likes: 0

From: Mass

Default

I run 18x10.5" Z06 wheels all around and have them wrapped with 275/35/18 Nitto NT 555s. I used a smaller spacer in the rear to give them enough room.

Tom

Order line - 1-877-4-TBYRNE
E-mail - tbyrne@tbyrne.com

SUPERCHARGER DISCOUNTS AVAILABLE!

Old

Jan 25, 2004 | 03:21 PM

#3

Teching In

Joined: Jan 2004

Posts: 41

Likes: 0

Default

I have 18X9.5 Z06 Wheels with 275/35-18 Nitto NT 555s. Bolted right up with no problems at all.

MRR

Old

Jan 25, 2004 | 09:41 PM

#4

TECH Fanatic

iTrader: (3)

Joined: Oct 2003

Posts: 1,645

Likes: 0

From: Kaneohe, Hawaii

Default

MRR and TYBYRNE, what offsets are you using for your wheels?

Old

Jan 26, 2004 | 07:16 AM

#5

TECH Senior Member

iTrader: (2)

Joined: Feb 2002

Posts: 12,091

Likes: 8

From: Schaumburg, IL

Default

The best fit available are:

18 x 9.5 with a 50 mm offset
18 x 10.5 with a 53 mm offset

Old

Jan 27, 2004 | 01:35 AM

#6

TECH Fanatic

iTrader: (3)

Joined: Oct 2003

Posts: 1,645

Likes: 0

From: Kaneohe, Hawaii

Default

Ah, thank you Xsta. After I posted, I realized I should have just checked the "will this fit" thread.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 12:06 AM.