SP 500 CCW pictures
10-11-2010, 07:14 PM
#23
On The Tree
Thread Starter
iTrader: (5)
Join Date: May 2004
Location: Iowa
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
I don't have many pics of the wheels as they just were installed last week.
The specs on the wheels are as follows.
front 19x10 2" lip 7.75 BS
rear 19x11 3" lip 8.15 BS (John at CCW recomended I run a Corvette BS incase I sell them I could offer them to that crowd as well. So I have a 5mm spacer on the back wheels to bring it out a little.)
Front Tires Hankook Ventus V12 275/30/19
Rear Tires Hankook Ventus V12 305/30/19
The Price on these 19's was a little over $800 for all 4 I had these on my car before with my other set of wheels and they are awsome tires for the price.
See my earlier post about my 60ft Dragstrip times.
If you can tell the car is lowered quite a bit with the Eibach Prokit. There is about a 1/4" of space betwen the inner WW and the tire (very tight but no rubbing). On the outer it must be less than a 1/8" with the fender rolled up. I must say it is as exactly how I wanted it to look on the rear. (No BFHing on the WW's at all)
On the front I will be getting (2) 5mm spacers from John as we speak. I just wanted the front wheel pushed out just a little more as has been mentioned before on here about trying get a flush look. When I spoke to John at CCW he was so dang helpful and honest about everything. Props go out to him!!!!! He knows his stuff and did I say he was Awsome!!!!!
He said he had not had anyone request the front be pushed out further on a F-body but he said it should not be a problem. I will get them on by the end of the week.
I hope this helps give some more info on the fitment.
Later this week will get the car on my lift and get some more pics for you guys to view.
Troy
The specs on the wheels are as follows.
front 19x10 2" lip 7.75 BS
rear 19x11 3" lip 8.15 BS (John at CCW recomended I run a Corvette BS incase I sell them I could offer them to that crowd as well. So I have a 5mm spacer on the back wheels to bring it out a little.)
Front Tires Hankook Ventus V12 275/30/19
Rear Tires Hankook Ventus V12 305/30/19
The Price on these 19's was a little over $800 for all 4 I had these on my car before with my other set of wheels and they are awsome tires for the price.
See my earlier post about my 60ft Dragstrip times.
If you can tell the car is lowered quite a bit with the Eibach Prokit. There is about a 1/4" of space betwen the inner WW and the tire (very tight but no rubbing). On the outer it must be less than a 1/8" with the fender rolled up. I must say it is as exactly how I wanted it to look on the rear. (No BFHing on the WW's at all)
On the front I will be getting (2) 5mm spacers from John as we speak. I just wanted the front wheel pushed out just a little more as has been mentioned before on here about trying get a flush look. When I spoke to John at CCW he was so dang helpful and honest about everything. Props go out to him!!!!! He knows his stuff and did I say he was Awsome!!!!!
He said he had not had anyone request the front be pushed out further on a F-body but he said it should not be a problem. I will get them on by the end of the week.
I hope this helps give some more info on the fitment.
Later this week will get the car on my lift and get some more pics for you guys to view.
Troy
10-11-2010, 10:14 PM
#25
TECH Enthusiast
iTrader: (4)
Join Date: Apr 2005
Location: Salinas/ San Diego, CA
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply NastyZ! That info definitely helps. How is the fitment of the 275 on the 10" front wheel, does it stretch the sidewall at all? Pics of the clearance would be awesome, and also pics of the front and rear tire to fender flushness would be great!
thanks,
Josh
thanks,
Josh
10-16-2010, 07:37 PM
#31
i think they look great like this.
removed your hockey stripes, gave you dark tint, slammed it, removed side ss emblem,antenna, side markers, and door handles, clear front corners.
removed antenna, key hole, ss emblem, tinted tails with clear reverse, tinted 3rd brake light...
love the wheels, but this is how i'd want it.
removed your hockey stripes, gave you dark tint, slammed it, removed side ss emblem,antenna, side markers, and door handles, clear front corners.
removed antenna, key hole, ss emblem, tinted tails with clear reverse, tinted 3rd brake light...
love the wheels, but this is how i'd want it.
10-16-2010, 09:19 PM
#33
10-17-2010, 01:06 PM
#34
On The Tree
Thread Starter
iTrader: (5)
Join Date: May 2004
Location: Iowa
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
i think they look great like this.
removed your hockey stripes, gave you dark tint, slammed it, removed side ss emblem,antenna, side markers, and door handles, clear front corners.
removed antenna, key hole, ss emblem, tinted tails with clear reverse, tinted 3rd brake light...
love the wheels, but this is how i'd want it.
removed your hockey stripes, gave you dark tint, slammed it, removed side ss emblem,antenna, side markers, and door handles, clear front corners.
removed antenna, key hole, ss emblem, tinted tails with clear reverse, tinted 3rd brake light...
love the wheels, but this is how i'd want it.
