Wheel Spacers
Wheel Spacers So, i went from +35mm offset adr m-sports, which were flush with the fenders but rubbed all the time, to +56mm offset z06 style rims, which are tucked in a little too much. Anyone have a recommendation on which brand or style of spacers i could use to give my new wheels that same flush look but without rubbing? Also, would i need anything else like longer studs, etc?
12 Second Club
iTrader: (6)
Joined: Apr 2008
Posts: 337
Likes: 0
From: The armpit of the United States.
Check out this thread. I am using 1" H&R adapters for my rear 17x9 speedlines. They are pricier than the ebay ones, but are hubcentric on both sides. The quality and fit is great.
https://ls1tech.com/forums/wheels-ti...cers-pics.html
https://ls1tech.com/forums/wheels-ti...cers-pics.html
Last edited by guy7bmwm83; Mar 31, 2011 at 12:31 PM.
H&R also makes a 20mm hub spacer, which would give an effective offset of +36 with your +56mm offset z06 style rims.
FYI, you might have to cut off the unthreaded portion of the factory wheel studs.
FYI, you might have to cut off the unthreaded portion of the factory wheel studs.
