Wheels & Tires Forged | Billet | Cast | Radials | Slicks

Anyone running a Nitto 325/50r15?

Thread Tools
 
Search this Thread
 
Old 04-15-2011, 10:48 AM
  #1  
11 Second Club
Thread Starter
iTrader: (18)
 
thunderstruck507's Avatar
 
Join Date: Mar 2008
Location: Northwest AR
Posts: 8,358
Received 26 Likes on 18 Posts

Default Anyone running a Nitto 325/50r15?

I have some MT in this size but I know the Nittos are smaller...I would like some accurate height, section, tread measurements mounted on a 10" or similar wheel.
Old 04-15-2011, 11:02 AM
  #2  
TECH Resident
 
BrianSF-GA's Avatar
 
Join Date: Sep 2010
Location: Cartersville, Georgia
Posts: 866
Likes: 0
Received 0 Likes on 0 Posts
Default

From Nitto's website ...

555R (only tire in that size)

OA Dia. 27.99", OA Width 13.11" as measured on a 10" rim.
Old 04-15-2011, 01:29 PM
  #3  
11 Second Club
Thread Starter
iTrader: (18)
 
thunderstruck507's Avatar
 
Join Date: Mar 2008
Location: Northwest AR
Posts: 8,358
Received 26 Likes on 18 Posts

Default

The Nitto 555r run smaller than advertised, that's the problem.

I had some 275/50 before in the 555R that were about 3/4" narrower than advertised IIRC
Old 04-15-2011, 01:59 PM
  #4  
TECH Resident
 
BrianSF-GA's Avatar
 
Join Date: Sep 2010
Location: Cartersville, Georgia
Posts: 866
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by thunderstruck507
The Nitto 555r run smaller than advertised, that's the problem.

I had some 275/50 before in the 555R that were about 3/4" narrower than advertised IIRC
The 275/50/15 as measured rim is 8.5" .... were the actual measurements of your tire taken when mounted on an 8.5" rim?

I know the Nitto's are smaller than the same size tire of another manufacturer, but I have not heard of a Nitto being smaller than their advertised dimensions on the as measured rim.



Quick Reply: Anyone running a Nitto 325/50r15?



All times are GMT -5. The time now is 04:51 PM.