Red Trans Am - Forgestar F14 Wheel Titanium Finish!
#101
TECH Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Brownsville, texas
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
#104
TECH Junkie
iTrader: (1)
Bob this is what I used to get prices and see alot of styles of Forgestar on 5th Gens. Tony was quick to respond when I was interested and well he made this site for us so hit him up.
http://www.camaro5.com/forums/showthread.php?t=125820
http://www.camaro5.com/forums/showthread.php?t=125820
#106
TECH Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Brownsville, texas
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
#111
TECH Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Brownsville, texas
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
ask Nineball. He can help you out.
#114
I have 17x11s with 50mm offset and 2" spacers for the time being. But the 17x11s have a 8" backspacing so a 0 offset would put me at a 6" backspacing and that would take care of the spacers. But I would like to get 18x10s for the front and 18x12s for the rear. Guess these won't work
#115
TECH Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Brownsville, texas
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
I have 17x11s with 50mm offset and 2" spacers for the time being. But the 17x11s have a 8" backspacing so a 0 offset would put me at a 6" backspacing and that would take care of the spacers. But I would like to get 18x10s for the front and 18x12s for the rear. Guess these won't work
#119
11 Second Club
iTrader: (8)
I considered 505As, LM20s, FM5s, FM10s, but they are insanely expensive, even for a used set. Weren't you in the same boat a while back with wheel choice and the BBK?