2011 LT Wheels (18x7.5)
#1
2011 LT Wheels (18x7.5)
I'm sure this has already been talked about, but I havent been able to find the thread. I have set of 18x7.5 wheels from a 2011 LT and would like to know if these can be used on a 98' Z28. Pretty sure the factory tires 245/55/18 will have to be changed out to a lower profile tire, but want to make sure the rims will work before investing in the tires.
Wheel
18x7.5
5x120
38MM
Thanks
Wheel
18x7.5
5x120
38MM
Thanks
Last edited by Axsd9d; 06-29-2011 at 02:38 AM.
#3
Thanks SilvaZ, that's what I was thinking as well. Anyone out there have this set up or can point me to a forum with some good information? I need to make a decision soon on which direction to take with replacing my tires. Thanks
#6
Because I would much rather hear from someone who already has this setup and would know of any issues like rubs, vibrations, etc. from the difference in lug measurements and offset.... Why even respond to a request for assistance if you are not offering any?
#7
Originally Posted by Axsd9d;1509[RIGHT
[/RIGHT]3352]Because I would much rather hear from someone who already has this setup and would know of any issues like rubs, vibrations, etc. from the difference in lug measurements and offset.... Why even respond to a request for assistance if you are not offering any?
Trending Topics
#8
Ahhh... I see your point! Perhaps when they were offered to me I should have said "No thanks, I don't want a free set of wheels"...
Glad to see that you have the answer for everyone here on the LS1 forums. Not exactly sure when 5 star wheels lost their appeal, but perhaps being the presumptuous douche bag that you are, you chose to make that statement regardless of knowing which variation of the wheel I have.
Ok. But what does this have to do with my question about the 18" wheels and specific measurements that were posted? Not trying to be a dick, but it's complete BS when someone asks a legitimate question and some **** swallow decides to reply with snide comments or useless information.
I found the answer I was looking for so no need to reply back.
I found the answer I was looking for so no need to reply back.
#9
TECH Regular
Join Date: May 2009
Location: Honolulu, HI
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Center hubs will need to be bored a few MM (my friend already tried to fit a 5th gen wheel on his 4th gen). 5th gens have a smaller hub. off set seems right. as stated above 245/40/18 tire should work.
#10
Sawzall and Welder Mod
iTrader: (46)
You wont have many friends with an attitude like that.
Ahhh... I see your point! Perhaps when they were offered to me I should have said "No thanks, I don't want a free set of wheels"...
Glad to see that you have the answer for everyone here on the LS1 forums. Not exactly sure when 5 star wheels lost their appeal, but perhaps being the presumptuous douche bag that you are, you chose to make that statement regardless of knowing which variation of the wheel I have.
Ok. But what does this have to do with my question about the 18" wheels and specific measurements that were posted? Not trying to be a dick, but it's complete BS when someone asks a legitimate question and some **** swallow decides to reply with snide comments or useless information.
I found the answer I was looking for so no need to reply back.
Glad to see that you have the answer for everyone here on the LS1 forums. Not exactly sure when 5 star wheels lost their appeal, but perhaps being the presumptuous douche bag that you are, you chose to make that statement regardless of knowing which variation of the wheel I have.
Ok. But what does this have to do with my question about the 18" wheels and specific measurements that were posted? Not trying to be a dick, but it's complete BS when someone asks a legitimate question and some **** swallow decides to reply with snide comments or useless information.
I found the answer I was looking for so no need to reply back.
#11
TECH Fanatic
Join Date: Aug 2002
Location: Katy, TX
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
Ahhh... I see your point! Perhaps when they were offered to me I should have said "No thanks, I don't want a free set of wheels"...
Glad to see that you have the answer for everyone here on the LS1 forums. Not exactly sure when 5 star wheels lost their appeal, but perhaps being the presumptuous douche bag that you are, you chose to make that statement regardless of knowing which variation of the wheel I have.
Ok. But what does this have to do with my question about the 18" wheels and specific measurements that were posted? Not trying to be a dick, but it's complete BS when someone asks a legitimate question and some **** swallow decides to reply with snide comments or useless information.
I found the answer I was looking for so no need to reply back.
Glad to see that you have the answer for everyone here on the LS1 forums. Not exactly sure when 5 star wheels lost their appeal, but perhaps being the presumptuous douche bag that you are, you chose to make that statement regardless of knowing which variation of the wheel I have.
Ok. But what does this have to do with my question about the 18" wheels and specific measurements that were posted? Not trying to be a dick, but it's complete BS when someone asks a legitimate question and some **** swallow decides to reply with snide comments or useless information.
I found the answer I was looking for so no need to reply back.
#16
That's fine. I dont recall asking for any.
You're thinking of the heritage wheels. Here is a shot of the wheels I have.
at your wheel comment and your "occupation". As far as me being lazy, your mom said she would have to disagree and that she loves my tool just fine!
at your wheel comment and your "occupation". As far as me being lazy, your mom said she would have to disagree and that she loves my tool just fine!
#20
TECH Regular
iTrader: (1)
Join Date: Nov 2005
Location: Maryville,Tn
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
lol, everyone in this thread needs to hug.
On a side note... Tech sure has changed a lot over the last few years... Used to be full of knowledgeable and caring people. Now its full of degradation and hate. What gives? Who cares what rims ol' boy puts on his car? Why can't he ask if something will fit? OP, take a chill pill.
I forgot, the internet is serious business....
On a side note... Tech sure has changed a lot over the last few years... Used to be full of knowledgeable and caring people. Now its full of degradation and hate. What gives? Who cares what rims ol' boy puts on his car? Why can't he ask if something will fit? OP, take a chill pill.
I forgot, the internet is serious business....