payanhilario

Will the oem c6 wheels fit on fbody with out Spacers the rear. 19 I've. Herd. You can just hammer the sides down on the fbody

Wing Zer0

iTrader: (3)

Well, I suppose it would, pending on the offset mainly, followed by width of rims. BFH and rolling fenders would be next if you didn't go by what I mentioned.

97 FiReBiRd

iTrader: (5)

you need a 1.25 spacer in the rear, if you want to hammer it you can, but i know damn well after seeing some people that have done that on here that I'm not taking a hammer to my car.....

teamfbody

me either,not just for a look anyway,i wont cut or BFH my T/A ever

meine96ws6

iTrader: (4)

I have had 6 sets of different wheels..I refuse to hammer or cut anything out... my 17x11 on 315's bolted up just fine..no issues or rubs

White01Formula

iTrader: (191)

My 19x10 C6 wheels barely fit my car with 1.25" spacers. I could barely fit my fingers between the tire and the wheel well with the spacers and they also rubbed in a few places. You would have to beat the hell out of your car to make them fit without spacers. Also, if your car is lowered you need to roll your rear fenders because they will cut the tires.

bwilde86

iTrader: (5)

What is the offset of your 19x10 c6 ?

BandDirector Blk98ZM6

iTrader: (21)

79mm I believe....

davy

do u have pics of them on ur car? im looking to get some 19" gumbys for my stock height 00 ws6

BandDirector Blk98ZM6

iTrader: (21)

Do a search under my username and "C6 19x10 all the way around" and you should be able to find several pics.