XXR 521 wheels help!!
07-06-2012, 01:01 PM
#27
TECH Enthusiast
Join Date: Jun 2012
Location: Reno,NV
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Axis Pentas Axis makes a mesh wheel called the Penta. I've only found them in Hyper silver with polished lip
they are staggered
19X8.5F +35mm
19X9.5R +40mm
I'd probably do the 19X9.5 +40mm wheels on all four cornes with 285/35/19s
I've heard the 40mm is good front and rear. bolt pattern is 5x120.7
but they are prices $1344 before shipping and tires
https://www.wheelstudio.com/view-whe...ll/vehicle-724
they are staggered
19X8.5F +35mm
19X9.5R +40mm
I'd probably do the 19X9.5 +40mm wheels on all four cornes with 285/35/19s
I've heard the 40mm is good front and rear. bolt pattern is 5x120.7
but they are prices $1344 before shipping and tires
https://www.wheelstudio.com/view-whe...ll/vehicle-724
07-11-2012, 03:38 PM
#28
On The Tree
iTrader: (6)
Join Date: Apr 2010
Location: la porte TX
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Ls1Jorge......any word from your Buddy. Those xxr 521s are sick. I would like to know for sure that they fit and how driving was. needing feedback. If they are good I am going to pick some up
07-12-2012, 09:40 AM
#29
Nah man he didnt text back, & I dont know the guy, I just saw his post forsale on craiglist, pretty sure the wheels fit, since his car has a 2inch drop, I wished he had more of wider tire & thicker side wall, then just the stretch tires. Im continue to look on craiglist everyday again to see if he repost the wheels forsale, since i lost his #. I made an account with flickr & commented one of his pics, hopefully hell back to me with some information on the wheels.
SOMEONE BUY THESE WHEELS
SOMEONE BUY THESE WHEELS
Last edited by ls1jorge; 07-12-2012 at 09:57 AM. Reason: Flickr
07-12-2012, 10:04 AM
#30
On The Tree
iTrader: (6)
Join Date: Apr 2010
Location: la porte TX
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
I am going to buy them. If they don't fit I will shorten my 8.8 build. I did some math yesterday and it will be about 1 3/4 past where my stock rims sit now. That is a lot and I took a tape measure and looked down at how far it would be. I think I'll have to shorten the rear to make it work but I don't care
07-12-2012, 03:12 PM
#33
On The Tree
iTrader: (6)
Join Date: Apr 2010
Location: la porte TX
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
I'm running 18x10.5 +30 with no rubbing issues on sportlines.
https://ls1tech.com/forums/wheels-ti...arrstoens.html
https://ls1tech.com/forums/wheels-ti...arrstoens.html
07-16-2012, 11:28 AM
#38
^
Karljr replied.
"Yeah Im in the stance crowd so the poke is what i wanted. Im maxed out as low as i can go in the rear without having to do any major modifications, bump stops are sitting on my axle plates. and in the front Im gonna go about another 2inches lower. In the rear i was running 245/40/18s they were stretched out on the 10s which gave me about 1mm clearance. and my fenders are rolled quite a bit. i still rubbed alot.
Karljr replied.
"Yeah Im in the stance crowd so the poke is what i wanted. Im maxed out as low as i can go in the rear without having to do any major modifications, bump stops are sitting on my axle plates. and in the front Im gonna go about another 2inches lower. In the rear i was running 245/40/18s they were stretched out on the 10s which gave me about 1mm clearance. and my fenders are rolled quite a bit. i still rubbed alot.
