wheels help!!!!!
Trending Topics
#15
Launching!
iTrader: (19)
Join Date: Oct 2003
Location: Houston, Tx
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Wheels that stick out past the fender is not a good look, especially on camaros. You have 10's with a +25mm offset, not only would the wheel stick out but the wheel would be too narrow to fill in the well when you look at it from behind. The TTM's at 10.5 @ +44mm offer a plush with your fender set up and looks very nice at all angles (not the wheel but the set up), nice wide tire that doesn't stick out.
If you can't do anything about the wheels then I would try to get a narrow rear or look to trade the wheels for a different size
If you can't do anything about the wheels then I would try to get a narrow rear or look to trade the wheels for a different size
#16
Launching!
Thread Starter
Join Date: Sep 2011
Location: Texas
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Its on a ws6, about how much would I need to narrow it? I also would like to get the rear 1/4 flared someone did it and it looks killer and he is running like 19X14 wheels on stock size rear end.
#17
Launching!
iTrader: (19)
Join Date: Oct 2003
Location: Houston, Tx
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
That guy has the first legit set up I've seen. But he did ALOT OF WORK to get it to look that way. Didnt just draw it up on a piece of napkin and go for it. I would do my homework on what all was involved before going that direction.
#20
Launching!
iTrader: (19)
Join Date: Oct 2003
Location: Houston, Tx
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
This was a one off deal. I dont know of too many shops willing to do something like this without some consent from the owner that if something goes wrong, they are not responsible. Needless to say, this is not your run of the mill mod.