Maybe a dumb question?
Thread Starter
Staging Lane
Joined: Jul 2010
Posts: 61
Likes: 0
Maybe a dumb question? ok....I installed 315 35 17 ttm's, did the bfg and also a fender roll. offsets are i believe 44mm.....???? btw running nitto extremes.... already did bump stops. If i run a plumb bob down from center of rear fender, and measure over to widest part of sidewall I have 3/16" that the fender is past the tire. Is this enough? I will be on stock suspension height. Thanks!
Its my understanding on stock height, NONE of those mods are necessary...... anybody with more experience feel free to chime in. I have same rims just have not had money to buy tires yet. You have 17x10.5 rear and 17x9 front right???
Thread Starter
Staging Lane
Joined: Jul 2010
Posts: 61
Likes: 0
Yep....Only have rear tires on now..front are on the way! So thats why I was asking. I have read the same but when you measure it looks close. Just wanted to make sure. Guess every car is diff. I def. had to do bump stops. and hammer to be safe.
Trending Topics
Thread Starter
Staging Lane
Joined: Jul 2010
Posts: 61
Likes: 0
no pics right now...at work. Basically I think its ok but just was looking for some experts to chime in. All I mean is the furthest (widest) point of tire is 3/16" set in from the farthest outside part of the fender. Is this ok?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
