ARP Wheel Studs
Thread Starter
TECH Regular
Joined: Dec 2011
Posts: 477
Likes: 0
ARP Wheel Studs For the 12 x 1.5mm lugs what is the correct part number for 1993-2002 Camaros and Trans Ams? I got a set from Summit but the knurled ends that get pressed into the axles are .010" larger then the factory oem lugs and are possibly too tight to get to seat. The package says "Most Late Model GM's". I just want to make sure that our cars are one of the mosts!
Joe
Joe
Thread Starter
TECH Regular
Joined: Dec 2011
Posts: 477
Likes: 0
If it helps anyone in the future, the rear ones at 2.5" are barely NHRA legal with my Prostars and the fronts with a 5/16" wheel Spacer are nowhere near legal! The studs are just flush with the rim surface so I need to get the 3.25" long ones!
10 Second Club
Joined: Mar 2008
Posts: 1,034
Likes: 1
From: Cape Girardeau, Missouri
I pulled mine in, because the relucter rings were still on the axles. Ive had no issues with mine that way. I dont see how putting a 100ft lbs on them to pull them in is any different than keeping that TQ on them the whole time a wheel is hanging on them.
Thread Starter
TECH Regular
Joined: Dec 2011
Posts: 477
Likes: 0
I could see if it took 200 ft/lbs to pull in it being a problem as well but not the minimal amount it took to pull mine in. I will say that it would be preferable to have a press though to do it and next time I will do it that way if I'm not in a time crunch!!!
Joe
Joe
