14k

I have a chance to get some at and skinny welds with et streets cheap. But they are off a 85 monte. Is the backspace correct?

14k

Anyone? I don't want to miss out on these. I'm reading online something about montes are 3.75. How would that look on my camaro? I want to buy them But I want a 100% or close answer that it would for.

BlueB4C

iTrader: (9)

I had an 85 non SS monte and the bolt pattern was correct for 5x4.75 (my IROC wheels fit over them) but the back spacing was incorrect going from 3rd gen camaro to monte. Sorry I couldnt help more, get them if they're cheap enough and if they dont work someone with a monte SS will buy them im sure.

14k

I'm just hoping the rears are close to fender flush or within reason. They are on 325/xx/15s

echos67

iTrader: (3)

When I sold my Monte SS I kept the Telstars I had and put them on my 97' T/A, they bolted up but stuck out too far so I sold them.

whitess1

iTrader: (2)

Rears on monte should be 4.5" backspacing on 8" wheel. 4th gen are 5.5" backspacing on 8" wheel. Would stick out of wheel well 1" plus

14k

Damn so it would look like a low rider with poked out wheels??