Rise of the Phoenix

iTrader: (27)

Well, 7.00 backspacing is recommended on a 17x9.5 for the fronts, so that would mean a 4.5 backspacing would be ideal. I'd say 4 or 4.5 would work.

UsedToBeProfessa

Awesome center caps! How can I get a set with bow ties or plain?

01maroonZ

I got 15 inch weld draglites on my car with Bfg 275/60r15 drag radials and my passenger side rubs bad what would be a better offset wheel

MertezWS6

iTrader: (8)

USEDTOBEPROFESSA, They don't sponsor this website so I cannot post who there from, but if you PM me I can let you know. They come plain and you polish them and put your own emblem on it. I chose the bird.

BUMP FOR SOME MORE PICS, POST YOUR TIRE SIZE TOO. I WANNA SEE SOME 26" TIRES

samsel450r

does anyone have a picture of the inside of the barrel of a 15x10 7.5bs wheel? either fbody specific or non specific.

manfred717

iTrader: (9)

Excuse my shitty cell phone pics

Photochop

iTrader: (74)

Looks good Fred, how does it hook on those hoosiers in boost with the stick?

BOBS99SS

iTrader: (2)

Looking for some strertlites, 17 or 15 fronts ,17x11 or 15x10 rears, 4409356738.located in northern ohio

Launch

you can see from pics online of the fbody specific streetlite it definitely tapers out sooner to clear the brakes. the non fbody looks like it has no hope of fitting. the weld prostar/draglite 7.5" bs 15x10s almost fit as they are but need a bit of caliper grinding

ive got new 275/50 hoosier QT's to go on and i still cant decide what wheels to buy. I keep thinking the weld prostars still look better even though they're ancient and trying to proven otherwise

Kmspeedie

iTrader: (1)

how do you upload pics, i think as far i know, in the only fbody with my exact billet specialty setup, i wanna upload pics, seems like it wont work on my phone

MadIceV8

iTrader: (12)

Toronto LT1

iTrader: (2)

Nice car,MadIce!

MMorgan9812

iTrader: (6)

MadIce those with black centers are awesome!!

2000 TA owner

iTrader: (1)

samsel450r

JakeFusion

iTrader: (7)

What'd you do to get the black centers? Did you powder coat? Paint?

MadIceV8

iTrader: (12)

Had them powder-coated right after BS created them. Then had the tires mounted.

Patsy57

iTrader: (37)

Does anyone run the 17x9.5 with corvette brake caliper conversion on the front?

MadIceV8

iTrader: (12)

It's a pretty tight fit with the stock setup/calipers. Even if it fits within the barrel, the "corvette" lettering would have to be ground off or a thin spacer would need to be used.

BC178

Anyone go less backspace then 4.5? My rear is narrowed 3 1/2 I really like how deep LS1CMR looks. Really want that super deep steam roller look. These will be for my street tires.