15" CCW Classics
#29
Thread Starter
Joined: Apr 2002
Posts: 5,231
Likes: 20
From: Houston TX
Had some issues with my axle offset measurements which caused some brake caliper bracket to rotor clearance issues. I got that sorted out finally and installed the axles yesterday. Just a quick pic I took in the parking lot. Going to try and get some good pics this weekend.
Last edited by DopeFedZ; 12-06-2012 at 07:00 PM.
#32
Thread Starter
Joined: Apr 2002
Posts: 5,231
Likes: 20
From: Houston TX
#34
I have to ask, will the 15" wheels fit over the stock rear brakes?
I have the 17/16 combo now and would like to have more tire choices as well. The M6 is tough to get to hook up and I have not had luck with the MT DR 315s.
I have the 17/16 combo now and would like to have more tire choices as well. The M6 is tough to get to hook up and I have not had luck with the MT DR 315s.
#37
Thread Starter
Joined: Apr 2002
Posts: 5,231
Likes: 20
From: Houston TX
These would not clear the the stock brakes at all even after grinding them to fit my old Weld Magnums. Even with these aerospace brakes I had to grind a tiny bit just to be on the safe side.
#39