Wide 11 or 12 inch wheels on the back? lol
#87
TECH Addict
iTrader: (7)
What is involved in cutting the bump stops? I have Torq Thurst II 17x11 with BFG 315s. tires get stuck on the bump stops when I jack the car up, and don't want to jack it up by the differential anymore. I already have the wheels off to install new rotors, so I want to modify the bump stops too.
#88
TECH Fanatic
iTrader: (1)
Join Date: Jul 2008
Location: Georgia
Posts: 1,863
Likes: 0
Received 0 Likes
on
0 Posts
What is involved in cutting the bump stops? I have Torq Thurst II 17x11 with BFG 315s. tires get stuck on the bump stops when I jack the car up, and don't want to jack it up by the differential anymore. I already have the wheels off to install new rotors, so I want to modify the bump stops too.
#95
https://ls1tech.com/forums/wheels-ti...s-picture.html
i have ran Sumitomo once in a 11in wide rim and no way in hell would i put that tire on a 12.5in rim. just to narrow for my comfort lol looked narrow even for a the 11. but on a 10.5 it looked fine.
#96
TECH Fanatic
iTrader: (6)
It's not about how it looks. At least for cornering grip a tire is almost always going to be happier on a wheel that is the same width is the tires tread width. For a 335 that would mean if I could fit it I would be running a 13. I don't have room for that so 12s it is.
Those Sumitomos are crap but even then I would still put them on a 12-12.5 in a perfect world.
Those Sumitomos are crap but even then I would still put them on a 12-12.5 in a perfect world.
#97
so I know this is a old post, but here goes nothing ....
I found these wheels today, guy is giving me a good deal, but they cam off of his ctsv....
The rears are 12 wide with a 50 offset ...
With this work on my ws6, PHB, lowered bmr 1.5, qa1 shocks in rear,