RPrezas

the car being dirty doesnt bother me, its just the car is sitting with the front end on jack stands with no motor or front end so getting a sitting stance pic will be pointless if its not gonna be sitting as it would be with tires in the front.. =/

exodus_gs1

iTrader: (3)

Those look good, as for rubbing your good im sure. I have 295/45r18's on the rear with the heater hose mod to lower it a tiny bit and I don't rub at all. Now the inner fender took a decent beating but im on c5 z06's so my offset may be different so you could probably be good all around. What Profile you gunna run on your 305's?

RPrezas

i was thinking 305/35/18's but I might just settle for 295/35's for now since I just really needa get my car running again. there is plenty of space on the inner fender side, outside is close but im sure it wont rub

CP-Z28

If need be, just roll your fenders. You could rub with 305's though.

RPrezas

yeah, thats what im planning on doing if it does rub.. cant wait to get them on my dam car

Johnnystock

iTrader: (6)

They look really great!!! Me want a set!!...I might try to sell my RPM hypersilver this summer.

Cant wait to see pic!

I love the gold and the black/chrome lip version too.

RPrezas

nice! i didnt see the black in chrome lip till after i bought em lol, but its ok cause i really like these.. I have a lot of free time so i might put on a rear wheel and take some pics, finally got me a very nice camera. we'll see how this goes..

RPrezas

well I was bored, and finally got a good camera.. put one wheel on my car cause, thats all I can put on.. heres some pics...



the drag wheel, a little comparison they are 325/50/15's...






stock suspension out back, lifted the rear by the diff, so idk if the car will sit lower, im pretty sure it will but this is the best i can get right now.

exodus_gs1

iTrader: (3)

that looks killer... Both wheel and tire combos look good

RPrezas

thanks, cant wait to see how it looks with all four wheels on and the car settled down, ima take out the rear rubber off the springs and maybe do BMR front springs or pro kit front springs dont know yet =/ i just want it to sit a little lower in the front...

WS6 What

iTrader: (16)

Looks good. Dont stick out much at all. But i do see rubbing issues though if dropped low. But otherwise looking forward to seeing it all back together and side shots. Gonna look good.

RPrezas

yeah i think they look pretty good where there at, there pretty flush with the car its self and love how it looks. yeah im sure it'll rub if i dropped it alot but i dont plan to, just a lil bit should be perfect. couldnt get a side shot cause there were so many things in the way

willy9

Finally someone bought them!! I was looking into those wheels for a long time and I might buy them now but my car is lowered though.

RPrezas

how much is it lowered?? tried them on my cousins bird and its slightly lowered with plenty of space to work with

willy9

It's lowered with vogtland springs around 1.2 to 1.5 inches.

00z28AT

iTrader: (3)

how much was your cousins car lowered? i wanna order these for mine, but im thinkin about dropping mine 1.2-1.5 inches also.

RPrezas

im not sure on the exact drop it has.. =/ it is lowered, a bit though. and looked like it had plenty of space to work with, im sure a 1.2-1.5 drop would be ok

00z28AT

iTrader: (3)

the only thing that concerns me is that it looks like it sticks out so far that even if the fenders were rolled straight up it looks like they would still rub.

RPrezas

you have to see it in person, it doesnt look like itll rub even if lowered, id say the only way is if it were to do some sore of crazy drop

CamaroSS27

iTrader: (6)

they look good bro