Yet another question about Weld RTS
#1
On The Tree
Thread Starter
Join Date: Aug 2006
Location: Raleigh, NC
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Getting ready to pull the trigger in the coming days on some black Weld RTS. Trying to make sure that I'm not missing anything when I finally get ready to slap them on.
Fronts
15x4 w/ SRs (26/6/15)
Rears
15x10 w/ 28" MT ET St. (275/60/15)
Car is stock ride height for now (will be adding QA1s when I recover from this LOL). I understand that I may have to roll my fender with it being a 28" tire and may have to bang in the wheel well slightly.
I've read a couple of posts about people having the fronts rub but it seems that isn't usually the case, right? I've looked at so many wheel/tire options here lately that it is starting to run together.
Am I missing anything? Anyone have a picture of this setup on stock springs/shocks? I've found a ton of pictures of these wheels but I don't know if any of them are at stock ride height.
Thanks in advance!
Fronts
15x4 w/ SRs (26/6/15)
Rears
15x10 w/ 28" MT ET St. (275/60/15)
Car is stock ride height for now (will be adding QA1s when I recover from this LOL). I understand that I may have to roll my fender with it being a 28" tire and may have to bang in the wheel well slightly.
I've read a couple of posts about people having the fronts rub but it seems that isn't usually the case, right? I've looked at so many wheel/tire options here lately that it is starting to run together.
Am I missing anything? Anyone have a picture of this setup on stock springs/shocks? I've found a ton of pictures of these wheels but I don't know if any of them are at stock ride height.
Thanks in advance!