Offset Question!
Thread Starter
TECH Apprentice
iTrader: (5)
Joined: Jul 2008
Posts: 335
Likes: 1
From: Los Angeles, CA
Offset Question! I probably should have asked this question before I put my order in 30 min ago but might as well ask it anyway since they are being custom built and can probably still make changes, anyway...
I have 57mm offset on my wheels and I hate the way they tuck up. I've read on here that 40mm usually sits flush with the fenders on a Camaro. So I ordered wheel and hub centric wheel adapters 3/4" thick (19mm). 19mm wheel adapters would put me at a 38mm offset correct?
On a 4th Gen Camaro will the wheels stick out a bit or will they more or less still be flush with the fenders? Should I have gone with a 17mm spacer instead? Any input is greatly appreciated.
Btw I've read the sticky that says 18x9.5 wheels will fit on a Camaro with Offsets of 38 to 56mm. I'm just making sure with my wheels that offset of 38mm won't stick out.
I have 57mm offset on my wheels and I hate the way they tuck up. I've read on here that 40mm usually sits flush with the fenders on a Camaro. So I ordered wheel and hub centric wheel adapters 3/4" thick (19mm). 19mm wheel adapters would put me at a 38mm offset correct?
On a 4th Gen Camaro will the wheels stick out a bit or will they more or less still be flush with the fenders? Should I have gone with a 17mm spacer instead? Any input is greatly appreciated.
Btw I've read the sticky that says 18x9.5 wheels will fit on a Camaro with Offsets of 38 to 56mm. I'm just making sure with my wheels that offset of 38mm won't stick out.
Last edited by L3THAL_Z28; Mar 13, 2015 at 08:24 PM.
Teching In
Joined: Dec 2007
Posts: 45
Likes: 0
From: Thomasville, Ga
38mm offset with 9.5 wheels should sit flush with the fenders
Check out the pictures of this camaro with 9.5 38mm fronts
https://ls1tech.com/forums/wheels-ti...fset-kdws.html
Check out the pictures of this camaro with 9.5 38mm fronts
https://ls1tech.com/forums/wheels-ti...fset-kdws.html
Thread Starter
TECH Apprentice
iTrader: (5)
Joined: Jul 2008
Posts: 335
Likes: 1
From: Los Angeles, CA
Thread Starter
TECH Apprentice
iTrader: (5)
Joined: Jul 2008
Posts: 335
Likes: 1
From: Los Angeles, CA
38mm offset with 9.5 wheels should sit flush with the fenders
Check out the pictures of this camaro with 9.5 38mm fronts
https://ls1tech.com/forums/wheels-ti...fset-kdws.html
Check out the pictures of this camaro with 9.5 38mm fronts
https://ls1tech.com/forums/wheels-ti...fset-kdws.html
