When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ok so my son bought some 15x10 Weld RTS wheels with 7.5 BS and he wants to run a spacer so the wheels sit flush like the old Weld Pro Stars we use to have like in the pic im going to post down below anyway which size should I use and also which size to use with the 17" or 18" front wheels just looking to get any opinions good and bad just give me reasons not any bashing lol or at least keep it to a minimal lol also on the 17s or 18 front which do you guys prefer like 17x5 or 17x7 or 18x 4.5 or 18x7 like I said he wants them flush with the fender lol thanks for any and all feedback.
ok so my son bought some 15x10 Weld RTS wheels with 7.5 BS and he wants to run a spacer so the wheels sit flush like the old Weld Pro Stars we use to have like in the pic im going to post down below anyway which size should I use and also which size to use with the 17" or 18" front wheels just looking to get any opinions good and bad just give me reasons not any bashing lol or at least keep it to a minimal lol also on the 17s or 18 front which do you guys prefer like 17x5 or 17x7 or 18x 4.5 or 18x7 like I said he wants them flush with the fender lol thanks for any and all feedback.
I would bolt the rears on with the tires you are going to use mounted to them and see where they end up. From there, you will be able to decide exactly what thickness spacer to use. That will be far better than someone on the internet telling you what to do!
I would bolt the rears on with the tires you are going to use mounted to them and see where they end up. From there, you will be able to decide exactly what thickness spacer to use. That will be far better than someone on the internet telling you what to do!
yea I know that's the game plan I was just curious to see if had already been plus trying to get info on the fronts but thanks for the reply
I'm trying to decide which fronts I want to run also 17x4.5 or 18x5. Also trying to decide between fbody fitment or C6 ZO6 fitment I think the ZO6 would let it sit more flush.
I talked to a guy who bought a set up off a C6 ZO6 and put on his trans am 18x5 fronts I'll post the pic below.
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.
WELD RTS with spacer? 
