cancam99ss

iTrader: (8)

badass... makes me want to sell my fikse's

98cherrySS

iTrader: (2)

I've been eyeing these for a while. Best looking wheel you could put on a an F-body imo. Did you notice a difference in feel over a 17" setup?

WS6 #3392

The lower sidewall in the rear was the biggest difference I noticed. It rides a little rougher is all but not that bad. I could switch and go with a 35 after this if I want. Have to wait and see.

jas01ta

Congrats on those rims. They look absolutely killer with the SOM!

I too have a SOM WS6 which I’m babying to high heaven. Before I pull the trigger on the S71’s 18’s, do you have any advice looking back on your tire size, spacing, etc?

Thanks

WS6 #3392

None what so ever dude! I wouldn't change anything about the wheels or tires. Go to my Instagram @ws6_3392 to see more pictures. Send me one of yours too.

jas01ta

Great to hear! Thanks for the feedback. Don’t have Instagram but attached it here.

Need4Camaro

iTrader: (1)

What sizes and offsets did you get?

I am thinking of going with 19x11 on the rear and 19x9.5 on the front for my 99 Z28. I am alittle concerned if the offsets will clear my CTS-V Brembo's.

The 19x11 has a 70mm offset though. Will that fit in the rear wheel hub without modification?

WS6 #3392

They are 18x10 high pad +41mm front, 18x11 medium pad +43 rear. I don't know if those will fit.

Need4Camaro

iTrader: (1)

Do you think that the +41mm offset on the front will clear my CTS-V Brembo's?

Also what tire sizes did you go with?

Hate to be a copy cat but unfortunately with work I don't really have alot of free time to do my own research and need to get my car back in one piece asap.

WS6 #3392

I think you will be fine with them. I am getting ready to put Baer big brake kit on. They are 13" Front Pro+ brakes for the front, and 13" SS4+ brakes for the rear. I put Falken Azenis RT660 285/30 ZR18 front, and Falken Azenis RT660 315/30 ZR18 rear.

Yun Gunz

Just bought the S77s for my Z and a Brembo kit lmao. Yours looks killer. Love SOM.

WS6 #3392

I like the S77 as well. I went back and forth on them. Send pictures when you get them mounted.

Need4Camaro

iTrader: (1)

I noticed that the difference in front/rear tire diameter in that combo is pretty close to 3%. Have you had any problems with the ABS?

Also what happens if I go 9" on the front and 11" on the rear? Will that cause any problems in terms of handling?

WS6 #3392

I have never had an issue. I don't think you would have any problems, but why wouldn't you go a head and run a 10 inch on the front?

Need4Camaro

iTrader: (1)

Ended up going with the Welds S71 18x10 Front & 18x11 Rear. Ordered and should have in 5 weeks.

Rabo73

iTrader: (1)

I ended up ordering a set of S-71s for my SS in November because of this T/A. He should get a percentage of sales from Weld! The wheels are like jewelry but maybe just as delicate. I highly recommend a quality ceramic coating.

WS6 #3392

Thank you! I did get them ceramic coated before I mounted my tires. So much easier to clean not just the outside but inside as well.

Rabo73

iTrader: (1)

When I got my wheels back from the detail shop I thought they didn't coat them because they didn't feel anywhere as smooth as the wheels I coated for wifey's car. But while putting on a new rear brake line someone forgot to tighten it the whole way and coated the inside of wheel Happy to say the ceramic coating did it's job!

TA_Freak

Looks amazing! Are you lowered? What's the ride like being staggered? After seeing those pics, I'm wanting a set as I'm replacing my stockers soon.

WS6 #3392

Yes it is lowered, and I have had it staggered for as long as I have had it. Not just with these wheels. I can't tell any difference to be honest with you.