New wheels...
#21
Originally Posted by longrange4u
Ok guys I figured out what my "Squeek" was....
These Ruff rims are beautiful, but in the back where they have to fit the axle they where not machined deep enough. This prevented them from tightening completely and allowed the rotor to remain slightly slopy...
The result: 4 Broken studs upon removal... and about an hours worth of grinding with a die grinder. I needed to back the lip off by about 1/16 of an Inch or so... What a pain...
But now they fit nice and snug... just took some work!
These Ruff rims are beautiful, but in the back where they have to fit the axle they where not machined deep enough. This prevented them from tightening completely and allowed the rotor to remain slightly slopy...
The result: 4 Broken studs upon removal... and about an hours worth of grinding with a die grinder. I needed to back the lip off by about 1/16 of an Inch or so... What a pain...
But now they fit nice and snug... just took some work!
#22
Well.... it was not the size of the rim that was the problem... it was the diameter of the hub and how deep they made the lip.... on the front becasue there was no axle it was no issue... but on the back... it was.
I dont think it would discourage me from buying.. I like haveing rims that nobody else has... just be aware that there may be some work to do on the back!
I dont think it would discourage me from buying.. I like haveing rims that nobody else has... just be aware that there may be some work to do on the back!
#23
color
Originally Posted by BrandonSS
is it just the pics or is the rear a lighter color? Maybe... it looks to be a lot lighter than the front wheel.
#26
Cost
It was close to 2k with tires mounted and Balanced to the door... They are 19x8.5 front and 19x9.5 back.
I cant say where I got them as they are not a sponsor... PM Me for info.
I cant say where I got them as they are not a sponsor... PM Me for info.