Will a 16" wheel fit on...
Thread Starter
Joined: Jun 2005
Posts: 5,221
Likes: 1
From: Skiatook, OK
Will a 16" wheel fit on... a 99' WS6 without rubbing anything? If so I'm gonna buy (2) 16" wheels & some DR for my trips to the track. I just wasnt sure if they would fit ok or not.
Thread Starter
Joined: Jun 2005
Posts: 5,221
Likes: 1
From: Skiatook, OK
Well actually I'm now lookin at some WELD racing wheels. But I only see the style of wheel I want in a 15" wheel.
What are you guys runnin weld wheels runnin? I was hopin they made like a 16" x 11" but havent found anything yet.
I originally was gonna just use (2) of my buddy's 16's off his Z28 with some DR on them. But now I want a seperate set of wheels from weld racing for at the track. Lookin into some skinnies for the front also.
Any info is very much appreciated.
What are you guys runnin weld wheels runnin? I was hopin they made like a 16" x 11" but havent found anything yet.
I originally was gonna just use (2) of my buddy's 16's off his Z28 with some DR on them. But now I want a seperate set of wheels from weld racing for at the track. Lookin into some skinnies for the front also.
Any info is very much appreciated.
Weld did make some XP's in 16" but they're discontinued. I had 15x3.5 and 15x10 Welds but you gotta gring the sh*t out of the calipers to fit them w/o running spacers and longer studs.
Thread Starter
Joined: Jun 2005
Posts: 5,221
Likes: 1
From: Skiatook, OK
I just talked to Weld racing & was informed they make NO 16" wheel to fit a 99' Trans Am. So it looks like I'm gonna have to just get (2) of those stock 16" wheels off my buddy. I hate to do that but I guess I can just only run those at the track since they wont match anything. Oh well, we do what we gotta do.
The guy from Weld did tell me that they will be making a wheel like I need in the near future due to other people wanting them. So at least a little good news.
The guy from Weld did tell me that they will be making a wheel like I need in the near future due to other people wanting them. So at least a little good news.
Originally Posted by BIG_MIKE2005
I just talked to Weld racing & was informed they make NO 16" wheel to fit a 99' Trans Am. So it looks like I'm gonna have to just get (2) of those stock 16" wheels off my buddy. I hate to do that but I guess I can just only run those at the track since they wont match anything. Oh well, we do what we gotta do.
The guy from Weld did tell me that they will be making a wheel like I need in the near future due to other people wanting them. So at least a little good news.
The guy from Weld did tell me that they will be making a wheel like I need in the near future due to other people wanting them. So at least a little good news.
Yes they make them. Mine are 16X10.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
