hi anyone drives them ?need i hubcentric rings or/and tuner lugs?
I wanted to put 8.5 in the front 10 in the back with 38 offset
they have a 5x120mm bold pattern will they stick out ???
thanks for any help

 

Your post makes no sense...at least to me. Why would you need hubcentric rings to run staggered wheel sizes?

So confused right now...

 

because its most likely not designed for the camaro/ firebird and the center of the rim will be large than the hub of the car thus relying solely on the lugnuts to center it. if u dont use the rings u are indangering ur life. if they are not centered correctly the lug nuts can not torque correctly and will work themselves loose.

 

Oh, I see what he's saying now. He wants to use a set of Hamann wheels on his F-bod. I know what hub centric rings are... I just didnt realize what the hell he was trying to say.

 

yep, that is right I want to put Hamanns on my trans am but hear different opinions about bimmer fitments on f-bodies.Some do not aprove ,some say nothing wrong with it.
now 2nd one will these 18x10 in rear with 38 offset stick out????
thx,men

 

Nope, they'll fit just fine.