Stripping & Polishing OEM WS6 Wheels
#41
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by joshp14
I read this thread and 30 minutes later I owned the stuff to do it...Here is the stuff I bought...this all look like the stuff you used?
![](http://www.midwestfbodymeet.com/pics/DTC01400.jpg)
![](http://www.midwestfbodymeet.com/pics/DTC01400.jpg)
#42
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by soupnazi67
I did one of my WS6's wheels last Friday after reading this thread. It had several places on it where the clearcoat was long gone. It looked bad but it looks great now! Thanks for the write up... very inspiring!
I used some generic paint stripper I purchased at Lowe's for about 8 bucks, a 75 cent paint brush, some Mothers aluminum and metal polish I picked up at Autozone, a garden hose and sprayer, a Dewalt corded drill, and some polishing wheels of various sizes that I picked up at Northern Tool.
I am worried about how long this wheel will stay shiny, although the polishing was pretty easy.
What's this zoop stuff you speak of?
I used some generic paint stripper I purchased at Lowe's for about 8 bucks, a 75 cent paint brush, some Mothers aluminum and metal polish I picked up at Autozone, a garden hose and sprayer, a Dewalt corded drill, and some polishing wheels of various sizes that I picked up at Northern Tool.
I am worried about how long this wheel will stay shiny, although the polishing was pretty easy.
What's this zoop stuff you speak of?
As far as what is zoop... Zoop Seal is a sealer for polished metal finishes. I haven't ever used it and have heard conflicting stories on it. You can order it from eastwood (one of our sponsors). Its pretty expensive, so I dont know if I'll be investing in it or not. If I do, I'll be sure and post before and after pics so everyone can see exactly how much it hazes the finish when it seals it.
#44
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by RollTideTA
Chrome wheels only require that you wash them, but no WS6 wheels ever came from GM chrome plated only a few 16" versions (would say ABS on the center cap and have 16" tires lol).
Also there were some polished 16's in the twisty style. Most of the time the twistys are painted.
I think the majority of the TA's, non-ramair, came with the chromed 16's. Mine did and just about all I've seen are chrome. I think the polished 16's are the rarer ones.
Anyway, I'd like to know more about protecting them. Woudl it be a good idea to clearcoat them after polishing? I was thinking of having mine sent out to be cleared at an auto paint shop. Anyone done that?
#45
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by JasonWW
SLP did send out some cars with chrome 17's like Rolltides style as an option. It's not from GM, but is factory, so they can be hard to tell. Just scratch it a little in a place you can't see like around the lugnut. If you go through a clearcoat you'll know for sure.
Also there were some polished 16's in the twisty style. Most of the time the twistys are painted.
I think the majority of the TA's, non-ramair, came with the chromed 16's. Mine did and just about all I've seen are chrome. I think the polished 16's are the rarer ones.
Anyway, I'd like to know more about protecting them. Woudl it be a good idea to clearcoat them after polishing? I was thinking of having mine sent out to be cleared at an auto paint shop. Anyone done that?
Also there were some polished 16's in the twisty style. Most of the time the twistys are painted.
I think the majority of the TA's, non-ramair, came with the chromed 16's. Mine did and just about all I've seen are chrome. I think the polished 16's are the rarer ones.
Anyway, I'd like to know more about protecting them. Woudl it be a good idea to clearcoat them after polishing? I was thinking of having mine sent out to be cleared at an auto paint shop. Anyone done that?
I know this is confusing, but the wheels I stripped and cleared were my OEM polished WS6 wheels. On my car right now, I have an aftermarket chrome set that was made by what used to be called aaarims.com.
#46
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm not confused.
Do you think aaarims.com made the rims that SLP offered several years ago? I guess it's possible that SLP simply chromed their own polished rims. I wonder where SLP got their 17" rims in the first place. Surly they don't have the ability to make them, do they? I don't know much about the backstory on that.
Here is another clearcoat I recently saw on another thread. Looks like good stuff, but is pricey.
http://www.alsacorp.com/products/cle...h_prodinfo.htm
Do you think aaarims.com made the rims that SLP offered several years ago? I guess it's possible that SLP simply chromed their own polished rims. I wonder where SLP got their 17" rims in the first place. Surly they don't have the ability to make them, do they? I don't know much about the backstory on that.
Here is another clearcoat I recently saw on another thread. Looks like good stuff, but is pricey.
http://www.alsacorp.com/products/cle...h_prodinfo.htm
Last edited by JasonWW; 04-06-2006 at 10:24 AM.
#47
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here is a pic of my rims currently. They are 3 years old and never been polished. They still look pretty good especially on a black car. Their silver color goes well with the black, but I'm ready to polish these suckers up like chrome. Do you think the Powerball and the Mothers polish would work on these to get a finish like yours?
I was considering just dropping them off at a polishing shop one at a time and have them do it, but your thread has inspired me.
I do NOT do any maintenance on my rims, so polishing every month (or more
) is not an option. So I think I should seal them up afterwards.
Any thoughts?
I was considering just dropping them off at a polishing shop one at a time and have them do it, but your thread has inspired me.
I do NOT do any maintenance on my rims, so polishing every month (or more
![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)
Any thoughts?
#48
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
FWIW... While washing my car on Tuesday, I sprayed some wheel cleaner on the wheel I stripped and polished last week. The cleaner had an instant reaction with the aluminum and left some discoloration. I got out the polish and a cloth and was able easily polish it off . I would recommend using soapy water on wheels without clear coat... unless you want to polish them every time. I will try to get the brand of the wheel cleaner I used if I think about it. I'm sure other wheel cleaners may vary...
#49
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wheel cleaner? What's that? Soap and water should clean the rubber. If it was designed for the rims then you used the wrong stuff. Certain rim cleaners are designed for clearcoat and others for raw aluminum. You have to make sure you get the right kind.
Is that what happened or am I missing your point?
Is that what happened or am I missing your point?
#50
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This cleaner said something to the effect of: safe for all aluminum and mag wheels... removes brake dust... etc... etc...
I'm trying to remember the brand, Meguire's (sp?)maybe... I will check.
I think, what it should have said on the bottle is something more like: safe for all aluminum and mag wheels, as long as they are CLEAR COATED!
I'm trying to remember the brand, Meguire's (sp?)maybe... I will check.
I think, what it should have said on the bottle is something more like: safe for all aluminum and mag wheels, as long as they are CLEAR COATED!
#51
TECH Fanatic
iTrader: (2)
Join Date: May 2003
Location: Missouri
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Man, I have been thinking about doing this to my wheels for 2 years now. I was just waiting for others to try it first
I think I'm probably going to do it, because I want to spend money on something besides rims right now, and this will make them serviceable for awhile.
I HAVE to use zoop seal or clear coat them though...there is no way I'll have time to polish them once a month. And I daily drive the car, so they are going to get gross if I don't either polish them often or use zoop seal. I'm going to read about it, and maybe I'll order it, try it, and post on here what I think (along with pics).
If anyone has done this already, please post!
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
I think I'm probably going to do it, because I want to spend money on something besides rims right now, and this will make them serviceable for awhile.
I HAVE to use zoop seal or clear coat them though...there is no way I'll have time to polish them once a month. And I daily drive the car, so they are going to get gross if I don't either polish them often or use zoop seal. I'm going to read about it, and maybe I'll order it, try it, and post on here what I think (along with pics).
If anyone has done this already, please post!
#52
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
RollTideTA, do you think the Powerball and the Mothers polish would work on my rims (below pic) to get a finish like yours? If so I'll buy the stuff and a drill. If not, I'll probably send them out for polishing. I just don't know which to do. Can anyone help me decide?
#53
Staging Lane
iTrader: (2)
Join Date: Apr 2005
Location: Brogue, PA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just finished stripping and polishing my wheels. Just want to add to the steps. When it says to "cake" the auto stripper on the wheels that is a must! I didn't at first and it took forever to get the clearcoat off. I found the sears polishing kit to work better than the mother's powerball. Be sure you don't rush any of this it takes alot of time. It is a big difference once everything is finished. Some people though i bought new wheels when i was finished with it all.
#54
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by JasonWW
RollTideTA, do you think the Powerball and the Mothers polish would work on my rims (below pic) to get a finish like yours? If so I'll buy the stuff and a drill. If not, I'll probably send them out for polishing. I just don't know which to do. Can anyone help me decide?
#56
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Lftu2
I have one question I plan on doing this to my rims tomorrow, Im wanting to know if its possible to put a clear coat back on it
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
#58
On The Tree
iTrader: (6)
Join Date: Oct 2005
Location: Honolulu, Hawaii
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by RollTideTA
I dunno... it sure wouldn't hurt, but you'll probably have to get something more powerful to restore the shine to yours. I believe they (torq thrust 2's)are not clearcoated at all, so your hazing is actually oxidation on the aluminum. Powerball and polish would definitely help, but I just dont know if it will be enough to get them to a chrome like shine. I'd try it and if it didn't work to your satisfaction, then get some more heavy duty wheel polishing stuff. After you do get the wheels to the shine that you want them, the powerball will be a great help in keeping them that way easily.