Lookin Great! 
CCW's hard to beat
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I'm happy to see CCW getting good props here at LS1Tech. As I've stated before, they were one of the few wheel mfg's that were willing to work with me. I have nothing but good things to say about them. Oh, and mario, those rides both look great. 
thanks here's more.
Unlike the 500's on the z, the 505's were bought used with tires for 2k shipped. They were custom for a z06. They had too much offset and we bought some spacers front and back and the longer nuts for spacers. The front on the T/A is still a little off and the back is right on. I had them on a ws6 formula first and with the too neg offset it looked a little crappy. I then put them on a nbm hawk and with the spacers and they were perfect. I think they do better on a T/A than a ss or Formula because of the side skirts. I guess if I was to buy another set I'd take the pics and make sure I get the offset to fit right on the wheel well edge like the z and the back of the T/A. The still looks very good anyway. Of all the T/A's I've had with numerous rims for the money invested, this red one hurts me the most.
I won't ever sell the CCW's. Ill just keep moving the rims around to my new ride.
enjoy
Unlike the 500's on the z, the 505's were bought used with tires for 2k shipped. They were custom for a z06. They had too much offset and we bought some spacers front and back and the longer nuts for spacers. The front on the T/A is still a little off and the back is right on. I had them on a ws6 formula first and with the too neg offset it looked a little crappy. I then put them on a nbm hawk and with the spacers and they were perfect. I think they do better on a T/A than a ss or Formula because of the side skirts. I guess if I was to buy another set I'd take the pics and make sure I get the offset to fit right on the wheel well edge like the z and the back of the T/A. The still looks very good anyway. Of all the T/A's I've had with numerous rims for the money invested, this red one hurts me the most.
I won't ever sell the CCW's. Ill just keep moving the rims around to my new ride.
enjoy
